Descrition:

3 in 1 Combination Profiles Paralled High-Speed Forming Machine

(Main U channel,Angle & Top Hat profile )

Specification:

1. frame system:standing tower polished on the face and chromated(see the picture)
2. Rolled Suitable coil strip:58mm,98mm and 105mm
3. Rolled thickness:0.45mm--0.9mm galvanized steel
4. Standing roller station:13 stands
5. Working speed:35-50m/min ,adjustable
6. Main machine power:15KW Siemens variable-speed motor made in China
7. Way of drive:gearbox for each roller station
8. Material of roller:GCR15 steel,heat treatment,HCR58-62,chromated on the roller
9. Material of shaft:45# steel ,shaft diameter:60mm.HB220-260
10. Way of cutting:hydraulic flying shear with AC servo-motor.(it is without stopping the machine for cutting),Yaskawa servo-motor made in Japan
11. Hydraulic power:5.5KW
12. Cutting blade material:Cr12
13. Cutting Length tolerance:+/-1.5mm
14. Hydraulis pressure:16Mpa
15. Hydraulic soilnoids:Rexroth made in Germany
16. Way of control: PLC control,Siemens made in Germany
17. Siemens interter control made in Germany
18. Siemens Touch screen made in Germany
19. Schneider contactors made in France
20. Electrical requirements:380v,50Hz 3Ph
21. Size of machine: approx 9m*1.5m*1.5m
22. We will adopt 3 sets for solenoids on the hydraulic station to control 3 sets of cutting device.while cutting one of the profiles,the other 2 sets cutting device wont work to gurantee the cutting blade not to loose the life

Equipment components:

Double-head motorized decoiler 1 pc (see the picture)

Roll forming machine with flying shear ,1