Outpower:3W/5W

Voltage:12V/24V

Working Temp:-40 degrees~ 105 degrees

Material:Aluminium alloy casing

Life span:30,000-50,000 hours

Certification:E4 / RDW

Dimension:Length:42mm *Diameter:17mm.

Installation: This LED lights can be installed at the bottom of the door flame and make sure the Len vertical with the ground ;

1. Pull down the inside door board first. Mark the suitable location for drilling a hole.

2. Drill the hole on the door board with our borer .

3.  Insert the product from the bottom of car door ,then arrange the power cord.

4. Install the nut through the power cord upon the hole inside; Tighten the nut; 5.Connect the power cord according to the installation guide; 6.Adjust the lamp projection to the suitable place with wrench tool.

7. Reinstall the inside door board,then check the final effect.