XWE XLE Bipolar Cycloidal Speed Reducer Environmental Protection

Description:

High speed ratio and efficiency
Single stage transmission can reach to 1:87
of speed-down ratio and the efficiency is more than 90%. If use multi-speed
drive the speed-down ratio is bigger.
Compact
Being adapted epicyclic transmission principle, the input and output shaft are at same axis center, it is compact.
Smooth and stable run and low noise
The cycloidal pinwheel has more meshed teeth, the overlapping coefficient id big and the machine part is stable, the vibration and noise is limited at the minimum content.
Reliable in operation and long life

Because the main parts are made of bearing steel through quenching treatment(HRC58-62), it got high
strength. Meanwhile the transmission contact of part adapts rolling friction, so it is durable and long life.
Because of reasonable in design, convenient in maintenance, easy to disassemble and assemble, the minimum amount of part and simple lubrication, so it is trusted by customers deeply.

Features :

1. X series cycloidal gearmotor is a reducer designed by cycloid needle teeth coupled planetary transmission principle. simple structure, convenient maintenance

2. Cast iron housing,compact construction,steady running,high efficiency

3. The products have been mainly used in machinery fields, such as chemical agitator, metallurgy, mine transmission,printing and packaging,brick,leather,etc.

+ Mechanical efficiency: ≥95%;

+ Input form: direct motor input, flange input, shaft input;

+ Materials of speed reducer body: HT200 cast iron;

+ Materials of shaft and cyclo-wheel: GCr15 high-carbon chromium steel;

+ Heat treatment: quenching;

+ Large speed reduction ratio: up to 6177:1(two-stage)

+ Noise of speed reducer: ≤50dB;

+ Backlash of speed reducer: ≤60arc.min.

Advantages :

1, cycloid reducer big reduction ratio, high efficiency: a reduction gear ratio is 9~87, the two-stage reduction gear ratio is 121 ~ 5133, multistage combination can reach tens of thousands, and the needle tooth meshing line type rolling friction, the meshing surface no relative sliding, so a reduction efficiency of 94%.

2, pin wheel reducer smooth running, low noise: the teeth contact at the same time when in operation, the coincidence degree high, stable running, strong overload capacity, low vibration and noise, a variety of models, small noise.

3, the use of reliable, long life: because the main part is made of high carbon alloy steel quenching (HRC58-62), and then grinding, and cycloid gear and pin gear set mesh transfer to the pin gear form rolling friction pair, friction coefficient is small, so that the meshing zone no relative sliding, wear small, so durable.

4, com