Description of platinum cure silicone rubber for tire mold

platinum cure silicone rubber is a kind of translucent liquid , generally named two-components silicone rubber with mixing in 1:1 .It’s mainly suitable for tire molds making .

Advantage of platinum cure silicone rubber for tire mold

1)Non- shrinkage

2)high tensile and tear strength with high copy times

3) exceptional fluidity and good operability (mixing ratio at 1:1 )

4)high temperature resistant in 250 Centigrade

Operation instruction of platinum cure silicone rubber for tire mold

Step One: Take value="100" tcsc="0" unitname="g" w:st="on">100g of part A and 100g of part B and mix in 1:1 and mix the two part evenly.

Step Two: vacuum pumping

Without exception, this step takes less than 10 minutes.

Note: The time for vacuum-pumping should be less than 3—5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.

Step Three: Pouring the mixture into the frame with original mold slowly .

Shelf life for silicon rubber for mold making

8~10months, when stored in a dry & cool place under the room temperature 25.

Packing for silicon rubber for mold making

20kg/drum for part A+ 20kg/drum for part B in one set

,200 kg/drum for part A+ 200kg/drum for part B in one set

 For getting further information about our silicone product, PLS contact with Miss Emily

TEL: 0086-755-89212382 

Email: hyxa(at)szrl(dot)net    

Welcome to visit www (dot)szrl (dot)net .anytime .