Liquid Silicone rubber for gypsum applications

1. Liquid Silicone rubber can used for gypsum crafts, gypsum statues , gypsum ceiling rose , gypsum columns , gypsum line , gypsum ceiling board ,and all kinds of gypsum decorations .

Liquid Silicone rubber for gypsum features

Liquid Silicone rubber is two part silicone with general hardness of 22value="50" tcsc="0" unitname="a" w:st="on">-50A°after curing with features ------

(1)high tensile & tear strength 

(2)  high duplication times

(3)Low linear shrinkage 

(4)resistance to high-temperature           

(5)Low shrinkage and non-deformation

(6)resistance to acid-alkali and expansion

Liquid Silicone rubber for gypsum operation instructions

Step One: Take value="100" tcsc="0" unitname="g" w:st="on">100g of part A and add value="2" tcsc="0" unitname="g" w:st="on">2g of part B and mix the silicone rubber and curing agent evenly.

Step Two: vacuum pumping

Without exception, this step takes less than 10 minutes.

Note: The time for vacuum-pumping should be less than 3—5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.

Step Three: Pouring the mixture into the frame with original gypsum mold slowly .

Shelf life for Liquid Silicone rubber

10~12months, when stored in a dry & cool place under the room temperature 25.

Packing for Liquid Silicone rubber

1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing,200 kg/drumLiquid Silicone rubber for gypsum applications

1. Liquid Silicone rubber can used for gypsum crafts, gypsum statues , gypsum ceiling rose , gypsum columns , gypsum line , gypsum ceiling board ,and all kinds of gypsum decorations .

Liquid Silicone rubber for gypsum features

Liquid Silicone rubber is two part silicone with general hardness of 22value="50" tcsc="0" unitname="a" w:st="on">-50A°after curing with features ------

(1)high tensile & tear strength 

(2)  high duplication times

(3)Low linear shrinkage 

(4)resistance to high-temperature           

(5)Low shrinkage and non-deformation

(6)resistance to acid-alkali and expansion

Liquid Silicone rubber for gypsum operation instructions

Step One: Take value="100" tcsc="0" unitname="g" w:st="on">100g of part A and add value="2" tcsc="0" unitname="g" w:st="on">2g of part B and mix the silicone rubber and curing agent evenly.

Step Two: vacuum pumping

Without exception, this step takes less than 10 minutes.

Note: The time for vacuum-pumping should be less than 3—5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.

Step Three: Pouring the mixture into the frame with original gypsum mold slowly .

Shelf life for Liquid Silicone rubber

10~12months, when stored in a dry & cool place under the room temperature 25.

Packing for Liquid Silicone rubber

1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing,200 kg/drum 

For further information, pls contact with Miss katherine

TEL: 086-0755-89948013

FAX：086-0755-89948030

Mobile: 086-18938867504  

Mail : hyxg(at)szrl(dot)net

Skype：katherine858687

Facebook：hysilicon@gmail.com

MSN：hysilicon@hotmail.com

Welcome to visit www (dot)szrl (dot)net anytime .

http://www.youtube.com/channel/UCed-QO7UZneNYsWTxR1KFA

http://www.linkedin.com/profile/view?id=189510785&trk=nav_responsive_tab_profile_pic

https://twitter.com/Saminaray

https://www.facebook.com/mouldsilicone

ui�plc
���p�r is two part silicone with general hardness of 22value="50" tcsc="0" unitname="a" w:st="on">-50A°after curing with features ------

(1)high tensile & tear strength 

(2)  high duplication times

(3)Low linear shrinkage 

(4)resistance to high-temperature           

(5)Low shrinkage and non-deformation

(6)resistance to acid-alkali and expansion

Liquid Silicone rubber for gypsum operation instructions

Step One: Take value="100" tcsc="0" unitname="g" w:st="on">100g of part A and add value="2" tcsc="0" unitname="g" w:st="on">2g of part B and mix the silicone rubber and curing agent evenly.

Step Two: vacuum pumping

Without exception, this step takes less than 10 minutes.

Note: The time for vacuum-pumping should be less than 3—5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.

Step Three: Pouring the mixture into the frame with original gypsum mold slowly .

Shelf life for Liquid Silicone rubber

10~12months, when stored in a dry & cool place under the room temperature 25.

Packing for Liquid Silicone rubber

1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing,200 kg/drum 

For further information, pls contact with Miss katherine

TEL: 086-0755-89948013

FAX：086-0755-89948030

Mobile: 086-18938867504  

Mail : hyxg(at)szrl(dot)net

Skype：katherine858687

Facebook：hysilicon@gmail.com

MSN：hysilicon@hotmail.com

Welcome to visit www (dot)szrl (dot)net anytime .

http://www.youtube.com/channel/UCed-QO7UZneNYsWTxR1KFA

http://www.linkedin.com/profile/view?id=189510785&trk=nav_responsive_tab_profile_pic

https://twitter.com/Saminaray

https://www.facebook.com/mouldsilicone