Brand:ENSAP
Model:MS2006
MOQ:2000 Pieces
Send Inquiry
Product SpecificationsBrand Name : ENSAPPurity (%) : 100ENSAP modified silicone adhesives and sealants based on silane modified polymer technology, it is with many advantages compared with the traditional bonding and sealing technology. Our innovative products provide a variety of flexible adhesive and elastic sealing applications, also can meet a variety of application of curing and bonding requirements for strength, durability and environmental friendliness.MS SEALANT FOR AUTO INDUSTRY MS2006Product Specification: Brand: ENSAP Code: MS-2006 OEM Material: MS modified silane Sealant Peeling Strength: 1.5(Mpa) Density:3.5MPA Film Formation Time: 0.2(h) Exudative Index:0 Tensile Adhesion: 2.0(MPA) Elongation : 400(%) Origin: Qingdao, China Curing time : 0.2(h) Curing Condition: Room Curing. Appearance: PastePackage:600ML /aluminium film 290 ml/(Hard Tube) 20 L/, 200L/(Barrel)Typical Properties: One Component Moisture Curing Adhesive. High viscosity, Good Bonding Capacity Free from solvent, ISO, PVC and organic silicon resin. Low VOC, Excellent UV resistantApplication: Furniture manufacturing industry: bonding mercury lens, aluminum sealing side, handle, crystal plate, marble, board glue, etc; Decoration industry: All kinds of wooden line, the door line, floor tile, ornaments and wall panel in the engineering and so on Ambry door plank industry: bonding crystal plate, etc Exhibition industry: bonding fixed all kinds of calligraphy and painting, signs, the force that press a gram, exhibition guangxi production and so onTechnical data: Density: White: 1.6g/cm3 Black: 1.45g/cm3 under 23℃ Collapse resistance: < 1.0mm Surface dry time : Around 30MIN, under 23℃×50%RH Shore A hardness: 43 Tensile Strength: Around 2MPA 100%Modulus: 0.7MPa Elongation at break :300% Volume Shrinkage:≤1.5%Operation: Keep the bonding surface clean, dry, without grease. Surface with grease can't be bonded directly. Rusty should be removed before bonding. Low humidity may cause difficult curing. Corresponding test should be carried out before bonding due Due to the difference of base material characteristics and construction method. Low environmental temperature can make the product viscosity increase, can adopt the way of heating temperature in order to improve the extrusion, suggested temperature + 15 ~ 40 ℃Storage and transport: Storage time : 9 months (Sealed storage at 10℃～25℃)
