Introduction:
Refined by modified water-based epoxy resin, epoxy curing agent, pigments, functional fillers, special additives, use water as the dilution, VOC content is lower than the relevant national standards. Easy to construct, fast drying, hard and tenacious coating film. Feels fine when touch. Good protection to the substrate
Applications:
Used in anti-rusting of ship steel above water (except the liquid tank), also steel rust primer and no zinc-coated paint, train, hold, drinking tank, container, etc.

Features:

1.High solid content, large besmear brush area;

2.Super corrosion resistance,salt spray resistance,solvent resistance,acid and alkali resistance

3.Suitable for various metal substrates, strong adhesion;

4.Dry faster, easier construction;

5.Poisonless and tasteless, non-flammable and non-explosive

Operating Instructions:

Dipping, brushing, or spraying paint, stirred uniformly before use, if the viscosity is high, diluted with proper water, do not add water more than 10%,and stirred uniformly;

When be one coat paint, the surface of being painted should be cleaned away oil spots, dust and rust.
The film can dry itself or be dried at low temperature. If dries itself, the minimum temperature is not below 10, and the value of humidity is under 70%.If it is dried, the leveling time is above 15 minutes at room temperature, minimum 25 minutes at 60;
Do not mix with other products or organic solvents. Wash all tools with water immediately after painting to avoid hardening. The remaining paint should be sealed, if dry skin, affect the use, filter with 100 mesh screen before use.