LDPE Specification

1. MFR=50
Grade 1150A

Product type: Injection
Melt Flow Rate g/10min: 50
Density g/ cm³ :0.9162
Tensile Strength (Mpa) :7.5
Elongation At Break% : 370
Wien Softening Point : 73

2. MFR=30
Grade 1130A
Product type: Injection Molding
Melt Flow Rate g/10min: 30
Density g/cm³ : 0.917
Tensile Strength (Mpa) : 7
Elongation At Break% : 330

3. MFR=40
Grade 1140A
Product type: Injection Molding
Melt Flow Rate g/10min:40
Density g/ cm³: 0.9165
Tensile Strength (Mpa):6.5
Elongation At Break% :310