Brand:hong ye silicone rubber
Model:Y-E665Additional cure mold making silicone
MOQ:200 Kilogram
Additional cure mold making silicone
Description of Additional cure mold making silicone
HYE665 is a two component, addition cure, heat (60°C) cure silicone rubber. It is designed as a hardness 65 (Shore A) rubber with easy mold release and improved resistance to cure inhibition. They also have excellent dimensional stability and low shrinkage.
Application of Additional cure mold making silicone
E665 addition cure silicone rubber is catered for pattern design, model design, mold making and tooling, and prototyping.
Datasheet of additional cure mold making silicoen rubber -- HY-E665
| Model | HY-E665 |
| Mixing proportion | 1:1 |
| Hardness (A°) | 65 |
| Density ( g/cm 3 ) | 1.21 |
| Viscosity (25 C°,mPa.s) | 20,000±2000 |
| Color | Translucent |
| Tear-strength (kgf/cm2) | 6 |
| Tensile strength (kgf/cm2) | 40 |
| Elongation-break(%) | 50 |
| Linear shrinkage (%) | < 0.01 |
Shelf life of Additional cure mold making silicone :
6 to 8 months from date of shipment when stored at 25°C in the original sealed packages.
First aid of Additional cure mold making silicone :
Inhalation: Remove source(s) of contamination and move victim to fresh air. Contact physician immediately.
Eye Contact: Flush eyes with plenty of water. If irritation persists, seek medical attention.
Skin Contact: In case of skin contact, wash thoroughly with soap and water; remove contaminated clothing and launder before reuse; seek medical attention if rash develops.
Ingestion: Do not induce vomiting unless instructed by a physician. Contact physician immediately.
After first aid, get appropriate in-plant, paramedic, or community medical support.
Transportation conditions tips for Additional cure mold making silicone :
The silicone rubber has excellent resistance to high temperature and low temperature. The product made of the silicon rubber can be used for a long period under the condition of temperature of -60°C~ 250°C. The product can be transported as non-hazardous goods. It's not harmful to human body in case of direct contact. Note: To protect the silicone product from sun and rain for better quality.
For get further information about our Additional cure mold making silicone rubber, Pls contact with Ms Daisy
TEL: 0086-755-89948294
Mobile: 0086-13925782741
FAX: 086-755-89948030
Email:hykj(at)szrl(dot)net
Skype:powerjack-daisy
