Brand:hong ye silicone rubber
Model:E620
MOQ:-0 -
Excellent mechanical properties provide for a trouble-free demoulding. Negative forms made of HY-E620 can be filled several times without losing their precision. The surface of the duplication model is smooth and hard without any additional treatment.
· Due to the short hardening time models can be demoulded after only 20 minutes. This saves time in the working process.
· Forms are almost shrinkless and have a high form consistency and long lasting dimensional stability thanks to the use of a platinum hardener system.
· Optimum adaptation to the mixing and dosing unit Dosper ensures premium material quality standards.
Technical Parameters
| HY- E620 | |
| Appearance | A: Transparent fluid B: Colorless and transparent fluid liquid |
| A:B(w/w) | 1:1 |
| Mixing Ratio cP | 5000~6000 |
| Pot life min | 10 |
| Curing time (25℃) min | 25-30 |
| Curing time (60℃)min | 5 |
| Hardness（Shore A） | 20 |
| Tensile strength (kgf/cm2) | 40±5 |
| Tear-strength (kN/m) | 10±2 |
| Shrinkage (%) | ≥0.1 |
| Elongation（%） | 500±50 |
PACKAGE
40Kgs/pail as a set (Part A 20Kg + Part B 20Kg)
SHELF LIFE AND TRANSPORTATION
1. Twelve(12) months when stored at 25C in tightly closed original packages.
2. This kind of product is non-dangerous product, which could be transported as general chemicals.
3. Storage beyond the expired date does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
