construction Powder Cement based Adhesive polymer modified Tile Glue

C1TE Tile adhesive is formulated with an advanced acrylic polymer technology. This adhesive offers extended open time for positioning and no vertical slip.
 
 
Product features
 
1. Easy operation
2. Has high bond strength.
3. Be premixed and produced.
4. Has strong water retention.
5. Has good flexibility to withstand shock and vibration.              
6. Has special formula to reduce material consumption and building load.
7. It is non-toxic, non-flammable, non-radiation, non smell and environmental.
 
 
Scope of application
 

 
 
Treatment of base plane
 
1. base plane should be smooth and firm, no dust, grease, release agents, batik material, etc.
2. Check base plane roughness by 2m ruler, error should be less than 5mm.
3. New plastering cement mortar should be constructed after 14 days maintenances.
 
 
Construction technology
 
Construction tools: leveling instrument, dentiform drawknife (3 x 3mm,4 x4mm,6×6mm,8×8mm,10 x10mm), tile generator, motor stirrer, big drum, cross-colloidal.
Stir and mix: mix tile adhesive and water as 25: (6-6.5), stirs completely and waiting for 5 minutes and stir again.
Lay-up construction: scrape the glue paste evenly on base plane with dentiform drawknife, the area should be about 1 m ² each time, then knead and press on the base plane. The model of the dentiform drawknife depends on the size of the tiles.
 

 
Attentions
 
1. The vertical and smoothness of the substrate must be confirmed before construction.
2. The product is suitable for construction in the 5-40.
3. Don’t use the dried paste by re-adding water.
4. If the base plane is uneven or the back of tile is not smooth, wiping the paste on the back of brick in order to ensure it full with paste to avoid hollowing.
 

Use level list
Tile size	Drawknife size	Use level(kg/sqm)
10x10cm tile or mosaic or below	6x6mm tooth form for base	3-4
60x60cm tile and stone or below	8x8mm tooth form for base	4.5-6
60x60cm tile and stone or above	10x10mm tooth form for base	6-8
60x60cm tile and stone or below, with deep  groove	8x8mm tooth form for base 3x3mm tooth form for tile back	6-8
Contact Infomation Send Inquiry Company name:TCPC Top Coat Paint Chemical Co.,LTD Status:[Offline] [Send message] [Chat] Business contact:Li (Ms.) Telphone: Mobile: Fax: Area: Caribbean Region-Bermuda Address:HESHAN INDUSTRIAL ZONE, TONGXIANG CITY Zip:100000