Door Construction:  type FINGERJOINT filled with stabilizing core AND HonEYCOMB PAPER filled in.The door is covered on both sides with MDF board  .
frame construction: The frame is made of blockboard and the ledge is made of plywood. The adhesives used are consisted of two components (polyurethane)  .

But you could also choose constructing the frame from solid wood.
Wall width: 10-24cm. Hole in wall :200cm*80cm .Door size:2000*800*40

For any sizes canbe customized.

Below info for you to found out suit door

Confirm the door hole 3 size for get the suit door

1.Door Hole’s High ,Width, measure 3 times(up, middle, down) get minimum data (≤20mm)

2.Wall Thickness ,measure 3 times (up, middle, down) get minimum data (≤5mm)

3.Wall thickness ≥80mm,if not reach 80mm ,need extend to 80mm for door frame stronger

4.Measure door size in kitchen and bathroom ,notice that add wall tile’s thickness (wall tile’s generally 25mm thickness single side )

Confirm door open direction

Confirm door open direction

1. A:Hinges : Right   Left PUSH
2. B:Hinges : Right   Left PULL
3. C:Hinges : Left     Right PULL
4. D:Hinges : Left     Right PUSH