Back
Electrical & Electronics
Send Inquiry|Share to friend|Sell Home|Channel list', 'Cancel');">
DIN 17175 ST35.8/I heat exchanger Welded Fin Tubes 20mmH X 1mmThK X 200FPM
2016-09-23 19:23  Views:222
Price:0.00 USD/-
Brand:-
Model:-
MOQ:-0 -
Send Inquiry

DIN 17175 ST35.8/I , 20mmH X 1mmThK X 200FPM , welded heat exchanger fin tube
 
Quick Detail:
 
High Frequency Resistance Welded Helical Steel Fin Tubes is widely used in the recovery of waste heat from boiler flue gas.
 

General HF welding production capacity

General specifications of HF welding fin tube

Welding Facility: 4 finning machines;
Daily production capacity up to 40 tons;
HFW Fin type: solid plain and serrated.

Tube OD: 19mm min.
Tube Length: 18 meters max.
Fin Height: 32 mm max.
Fin Thickness: 0.8mm min
Fin Pitch: min. 4 mm for solid fins & 3.3mm for serrated fins.

 
Description:
 
General Manufacturing Process: The fin strip is welded continuously and spirally wound onto a polished bare tube. And the tube and fins are bonded together by using high frequency resistance welding technique.
 
We produce both solid plain and serrated helical welded steel finned tube. And also, all spiral welding tubes could be bent in the middle or at the end of fin tubes, we call it Hairpin tubes.
 
 
Additional Services for Solid helical welded fin tubes:

  1. High frequency welding machine output power supply: 200KW or 300KW
  2. The High Frequency Resistance Welded Spiral Fin Tube quality is assured by hydrostatic or pneumatic tests and tensile tests in order to verify the mechanical bonding between bare tube and fin materials.
  3. Acceptance criteria: INTERNATIonAL STANDARD FOR DIMENSIONS, TOLERANCES, AND TESTS OF HIGH FREQUENCY RESISTANCE WELDED FINS or the delivery conditions (TDC) of clients.
  4. Visual check: un-welded parts of fin, fin damage after fining, copper pollution, tears, wrap etc…
  5. Dimensional check: fin height, fin spacing, fin inclination, fin corrugation, length of finned & un-finned portion etc…
  6. Bending check: ovality, thickness and area reduction.
  7. Coating: outside-Red oxide zinc phosphate primer and inside volatile corrosion inhibitor (VCI) in water soluble tablet form.
  8. Fin end finish: Bevel(30~35degeree)
  9. Delivery condition: Tube ends are square cut, free burrs, internally dried and air blown clean, externally coated with varnish at both ends of helical welded tubes. The desiccants are put into the each package for continental transportation as well.
  10. documentation shall include QAP, WPS, PQR& WPQ, raw materials mill certificates, inspection and test samples results and warranty certificate of manufacturer.

 
Applications:
 
The High Frequency Resistance Welded Helical Fin Tubes are widely applied in fired heaters, heat exchanger, boilers, economizers, pre-heaters, coolers, heat pipes, heaters etc….
 
Specifications:
 
A wide range of fin and tube materials could be combinations are available.
 

ItemsGeneral MaterialsPopular ASTM  Materials
Core Tube Material

Carbon Steel , Alloy Steel, Heat Resistant Steel,
Stainless Steel etc.

10#,20#,15CrMo,Cr5Mo,Cr9Mo,1Cr18Ni9Ti,0Cr18Ni9,                      00Cr17Ni14Mo2,SA106B,SA106C, SA192, SA179,                     
SA178,SA214, SA210-A1, SA210-C,TP304/304L/304H,               TP409/410,TP316/316L,TP321/321L,TP347H,T11,T22,T91,etc.            
 

Fins Material 

 Carbon Steel , Alloy Steel, Heat Resistant Steel,
Stainless Steel etc.

Q235-BF,08F,08AL, 1Cr18Ni9Ti, 0Cr13, 1Cr13, 0Cr18Ni9, 09CrCuSb, CS,A1008-B,SPHC, SPCC, TP304/304L,TP316/316L,TP321/321L,etc.

 
Dimensions Data Sheet We Can Supply.

Solid Helical Steel Fin Tubes Fabrication Ran

Contact Infomation
Send Inquiry
Company name:Jiangyin Reliance International Trade Co., Ltd
Status:[Offline] [Send message] [Chat]
Business contact:Lucy (Ms.)
Telphone:
Mobile:
Fax:
Area: Caribbean Region-Bermuda
Address:19,ShaShan Road,HuaShi Town
Zip:214000