Brand:-
Model:-
MOQ:-0 -
USB SPI -V4 Laser Marking Cardboard for the G4.0 laser machine
Quick Detail:
SPI laser marking card can be used to control the SPI G4.0 laser machine to marking,engraving,cutting on
surface of material.Software EZCAD Support SPI laser type.
Description:
- 68-pins SCSI 3socket is used on the board to connect SPI G3 laser module directly .
- Support SPI laser type.
- Compatible with USB2.0 specifications.
- Mark-on-fly: encoder can be connected to the board to measure the fly speed .
- Power supply:+-5V/3A
- Dimensions: 167mm*125.5mm*23
- USB2.0 compatible
- Only support SPI laser machine
Applicable scope:
- Laser Marking
- Laser Engraving
- Drilling circuit board with holes
- Laser marking on metal
- Wave Optional:0-39
Function:
- Fly marking
- Ruler mark
- 4 kinds of Hatch
- Two axis control
- Multi-head
- Vision mark
Specifications:
| FEATURE |
|
different jobs (The function needs special software). Two axes for step/servo motor are available. Remark function: this function is used to remark what ever is in the memory of the board, especially convenient for high speed marking of a same pattern. Compatible with USB2.0 specifications.
|
| Use 68-pins SCSI 3 socket,connect SPI G4 laser module via 68-pin cable directly. |
| Extend axes output:Two Direction/pulse signals,used to control stepping motor or servomotor |
| Mark-on-fly function with an encoder connected |
| 25 routes general digital signals(TTL compatible), 4 of the IO ports can be OC IO, can connect with relay. |
| 13 routes of input(TTL compliant) .In0, In4-In13, XORG0(IN14), YORG0(IN15) . |
| 8 routes of output(TTL compliant) .Out0-7 output from CON5 ,and out4-7 could be OC. |
| Original start signal:Used when marking contents are the same and high speed is required Compatible with USB2.0 .. |
| CARD PARAMETER |
