Hot Runner Spring Coil Heater with Thermocouple

1. Spring Coil Heater Brief Introduction

Wuhan Global metal hot runner coil heater use Germany heater wire, United States high-purity magnesium oxide material, and strict process technology. There are various  cross section and size for choice, such as square, round and flat, provide high-performance electric heater for heating hot runner mold and other fields.

Heater maximum temperature up to 650 ºC, the integration of temperature thermocouple for the precise temperature control, can provide K, J, E thermocouple, blasting and blackening surface treatment, also can provide bright surface.

2. Spring Coil Heater Characteristics

a. Very good performance of the heating uniformity in the heating area.
b. The inside insulated cover, same as the German GC.
c. High insulation (more than 500M ohm) and high pressure resistance (1000V above), can meet special requirement if customers need. 
d. The moisture-proof can be IP65, suitable for working in bad condition.

3. Spring Coil Heater Parameter.

• Standard Configuration
• Material :304
• Unheated length(L1):45mm
• Connector(cold side)(DxU):
• Square cross-section:7.6x26mm
• Round flat cross-section:Φ7.5x29mm,Φ3.5x40mm
• Power lines,grounding wire length(L):1000mm
• Jacket:Silicone fiberglass sheathing establishment,black and others
• Thermocouple:J tpye
• Compensating lead wire length(L):1000mm
• Surface treatment:sandblasting,black, polish

Spring coil heater (H series)	3.0x3.0 3.3x3.3 4.0x2.0 4.2x2.2 4.5x2.7	Φ3.0	Φ4.0	Φ5.0	3.5x3.5 4.0x4.0	5.0x5.0
Voltage	220V,230V,240V
Power tolerance 115W-200W	+/-10%
Power tolerance  201W-2000W	+5%-10%
Out jacket length	30mm~280mm
Diameter of the inner sleeve/wrapped diameter	10mm~42mm
Unheating length	45mm
Max power density	9W/cm²
Heating Length tolerance	+/-0.05mm
Unheating length tolerance	+/-2.5%
Tolerance ID d ≤20mm	Without inner sleeve:-0.15mm With inner sleeve:0.05mm~0.10mm
Tolerance ID d 20mm~30mm	Without inner sleeve:-0.20mm With inner sleeve:0.05mm~0.10mm
Tolerance ID d ≥30mm	Without inner sleeve:-0.25mm With inner sleeve:0.05mm~0.10mm
Tolerance cross section	+/-0.15mm			+/-0.20mm
Contact Infomation Send Inquiry Company name:Wuhan Global Metal Engineering Co., Ltd Status:[Offline] [Send message] [Chat] Business contact:Frank (Ms.) Telphone: Mobile: Fax: Area: Caribbean Region-Bermuda Address:2303 Century Square , Zhongnan Road Zip:430000