DZ-90 Vibratory Hammer Rental , Pile Hammer Small Size for Real Estate Foundation

Features

• Shock-proof motor

Shock-proof motor can work under high temperature up to 95, permit short-time overloading and has high starting torque. Wedge-shaped belt of high-strength is adopted.  

• Bearing

The bearings required will receive impact load, radial acceleration, high limit speed and other additional load. Use German FAG bearing to increase load capacity to more than 18% and prolong liftspan to

more than 70%.

• Production technology

Premier welding process complies with national standard and is inspected by Ultrasonic-wave. Bottom

of the gear box is reinforced to minimize the possibility of damage.

• Noise-proof design

Install rubber pad on top and bottom of the springs to realize buffer action and absorb noise. Steel pad is added on spring bottom to reduce noise

• Bearing ring design

Specially-designed bearing ring with three layers to withstand intense vibration and avoid cracking during operation, much more superior than traditional embedded design.

• Oil precipitation design

Foreign matters may fall into the box accidentally, and oil precipitation system is designed to prevent these matters and oil stain from doing harm to gear and bearing.

Application scope

• Pre-cast concrete pile

Vibratory hammer, with corresponding clamps, can be used for various types of piles, such as pre-cast concrete pile, steel pile, cast-in-place concrete pile, concrete expansion pile, lime pile, san pile and gravel pile, etc.

• Cofferdam

Vibratory hammer can be used to drive sheet pile to build the coffer wall. It is highly-efficient to push and extract sheet piles.

• Trestle project and offshore working platform

Vibratory hammer to drive sheet pile or casing pile to build working passage and platform. It is easy for installation and removal.

• Single pile and group piles foundation for offshore wind mill

It is efficient to use vibratory hammer to drive piles into the sea, which is easy for adjustment and environmental friendly.

	Name: Qingdao Bay Bridge Location: Qingdao City, Shandong Province   Project profile: Qingdao Bay Bridge, locating in Qingdao main urban zone, stretches  from Yangjia Qun entrance of National Expressway 308 to the western  Huangdao red cliff, spanning across the sea area of Jiaozhou Gulf.  The whole length of phase I project is 28.05 km, and phase II project  is 12.25 km, with seacrossing distance of 25.17 km. The main  bridge is 35m wide and has six lanes in two way direction. Designed  driving speed is 80km/h. Estimated investiment of the project is  around RMB 9.04 billion. Geology situation: silty clay, silty lime rock stratum.   Construction situation: Diameter of steel pipe sheet is 820mm, and  driving depth is 15m-23m   Applied products: DZ-90 pile hammer     Quantity: 11 sets
	SPECIFICATIONS
Contact Infomation Send Inquiry Company name:China Engineering Equipment Network Co.,Ltd Status:[Offline] [Send message] [Chat] Business contact:Henry Z (Ms.) Telphone: Mobile: Fax: Area: Caribbean Region-Bermuda Address:3F, Block B, Wenchang Building, International Enterprise Cen Zip:430000