Insertion Type Electromagnetic Flow Meter High Performance
 
 
Introduction:

    MTF electromagnetic flow meter, composed of sensor and converter, works based 

on Faraday’s law of electromagnetic induction. It is used to measure electrical

conductivity of liquid or solid. Generally, the electrical conductivity should be over 

5υS/cm(electrical conductivity of tap water, raw water is about 100500υS/cm),It can 

also be used to measure various mediums like acid, alkali, saline solution,paper,pulp,
ore pulp and so on.But these mediums can’t contain a lot of magnetic materials and bubbles.
MTF electromagnetic flow meter is, a kind of instrument,used for measuring the flow 

conductivity liquid, which is widely used in flow measuring of metallurgy,Chemical industry 

Paper industry, Environmental protection, Oil industry, Textile industry,Food industry

Installation location precautions

The installation location is chosen according to the following requirements, ensuring

the stable and continuous operation of instruments.
Atmosphere temperature: avoid large temperature change and sunshine, if some thermal

radiation in the installation location, the thermal insulation and ventilation should be applied.
Air condition: avoid strongly corrosion and explosive gas in the installation location
(non-explode-resistant instrument).

Change adapter direction

It is not recommended to change the adapter direction by users, if it is necessary to

change, pleasecontact service center.

Product application scope

The insert-type electromagnetic flow-meter is composed of sensors and adapter, using

for measuring conductive liquid. During measurement, conductivity is required to be

more than 5μ s/cm, and water, sewage, acid and alkali and so on could be measured.

Sensor structure

The sensor is composed of measurement detector, installation flange and wire box

(separate type)
Adapter
Flange
base
and so on. The sensor outline is in cylinder shape with installation flange, inside which

the excitation winding used for exciting, magnet-conductive winding and two electrodes

of magnet-conductive core, contacting liquid, are installed.
 

Linging material

Lining material	Main Performance	Applied Scope
PTFE	Have the most stable chemical properties in plastics, and resist boiling hydrochlor and sulfuric acid, nitric acid aqua regia, strong alkali, and all kinds of organic solvents, but can not resist the corrosion of chlorine trifluoride, liquid fluorine, liquid oxygen and ozone. Low abrasion resistance 3.Low negative pressure resistance	Contact Infomation Send Inquiry Company name:Nanjing Metlan Measurement & Control Instrument Co., Ltd Status:[Offline] [Send message] [Chat] Business contact:Miss. Angel (Ms.) Telphone: Mobile: Fax: Area: Caribbean Region-Bermuda Address:No.12, Rungu Road, Guli Industrial Zone, Jiangning District Zip:210000