Full Automatic metal Slitting Line ZJX-3X1600 , Electric Control System

• Application:CR/HRC/stainless steel /galvanized
• thickness of coil plate:0.3-2mm
• width of coil plate:1250mm
• coil weight:10MT(max)
• line speed:0-120m/min

Automatic Steel Slitter For Cold Rolled Coils , 0-120m/min Line Speed

ZJX-0.2-2X1250mm full automatic slitting line is used for slitting the carbon plate to prepare for the next process.

1. Hydraulic entry coil car

The car can move levelly and vertically, which is convenient for putting the steel coils into the de-coiler.

It is driven vertically by hydraulic cylinder with four guide pillars.

The level movement is driven by 1.5KW cycloidal motor.

2. Hydraulic cantilever un-coiler

Supporting steel rolls and uncoiling.

It can expand and shrink with hydraulic oil cylinder and fit with the inner hole of the steel coils and is equipped with supporting stand.

Moment motor drives the coils running and the motor can run right and left to prevent the coils running by inertia.

3. Hydraulic press and pinch and feed device

Two hydraulic oil cylinders control the lifting of rollers.

Hydraulic telescopic shovel and hydraulic press and hit the head device, etc to feed the plate.

Hydraulic pinch and feed device: driven by the cycloid pinwheel decelerator and equipped with hand clutch. The pinch rollers adopt the hydraulic oil cylinder to press down. It is driven by down rollers.

4. Hydraulic head-cutting machine

Adopt two columns structures, a press device, can cut the 3mmX1600 steel plates;

The up and down blades which are alloy material 9CrSi can adjust their gap;

The machine is used for the steel shear and to make the plate easy to slitting machine.

5. Looper

It uses the 2 groups of magic eyes to control