7.5KW Shelf Steel Roll Forming Machine Cr12 Cutter Blade With Servo Feeding

Main composition of the machine

The machinery line consists of 5.0 tons manual de-coiler, material flattening and straightening,servo feeding, hydraulic punching,material guiding, main roll  forming machine, hydraulic cutting system ,run-out table, control cabinet with PLC

Technical parameters

1. Matching material: GI

2  Thickness:0.4-0.8mm       

3. Main motor power: 7.5KW  

4. Forming speed: 8m/min(including punching and cutting)

5. hydraulic station power: 11 KW  

6. Quantity of stands:20 stands

7. Shaft Material and diameter: 75mm, material is 40cr 

8. Material Of The Stations: Guide rail style  

9. Tolerance: 3m+-1.5mm

10. Way Of Drive: 1.5 inch single chain             

11. Controlling system: PLC 

12. Total weight: about 12 Tons    

13. Voltage: 380V/ 3phase/ 50 Hz

14. Size of the machine: L*W*H 10m*2.0m*1.6m

      Size of the line: L*W*H 25m*2.5*1.6m

15. Material of forming rollers: 45# steel, coated with chromed treatment

16. Material of cutter blade: Cr 12Mov mould steel with quenched treatment 58-62

18.  The rollers surface is mirror polished.

19.  The punching mould material is Cr 12Mov.