PN0.25 - 6.4 Mpa Electric/Manual  Gate Valve for Hydro Power Station

Specifications:

Gate valves is one of the most common open or close the valve, the use of the gate is up and down to work full open and full close to block fluid in the pipeline.

The gate is usually wedge shaped. When the valve is wide open, the gate is fully drawn up into the valve, leaving an opening for flow through the valve the same size as the pipe in which the valve is installed. Therefore, there is little pressure drop or flow restriction through the valve.

Structure Description:

1. Two side of valve ends are flange bolts connection structure.

2. sealing surface of seat bead welding with the iron and chromate nickel stainless steel, have a good performance on wear resistance and scratch resistance.

3. There is nitriding process on Stem surface to resistance corrosion, has good corrosion resistance and scratches resistance .

4. The valve open or close operation are controlled by the electric device which installed on the head of valve. Electric device equipped with electric motor, reduction gearbox, torque control device, travel control device, the site operation device, and  hand-electric switching mechanism.

The valve working