99.999% High Purity Nitrogen Generator PM Membrane Nitrogen Gas Generation

Working Principle of  99.99% NitrogenGenerator

Under a certain pressure, using the large difference of the diffusion rate between nitrogen and oxygen 

from the air in the carbon molecular sieve, a large number of oxygen is adsorpted by carbon molecular 

sieve, while nitrogen is collected in a short time, to achieve separation of oxygen and nitrogen.

The adsorption capacity of carbon molecular sieve is significantly different with different 

oxygen pressures, reducing the pressure will release oxygen from carbon molecular sieve, this make 

carbon molecular sieve regeneration, then can be used repeatedly.

Using two adsorption towers, one for adsorption and nitrogen generator, the other for desorption and recycling. 

They switch with each other, thus continuous output of high-quality nitrogen. 

Environment condition of equipment

1.installation place: ground grading, without foundation, but it is necessary to have a sewage discharge 

ditch.

2.The reserved area: about 200m2.

3.Ambient temperature: ≤40°C.

4.Relative humidity: ≤80%.

5.Power:440V/ 380V/220V,60/Hz/ 50Hz

Specification:

Item	Technical	Remark
N2 flow rate	1200Nm3/h	Standard state
N2 purity	≥95.0%	non-oxygen content
N2 outlet pressure	0.1~0.6Mpa	Gage pressure, adjustable
Contact Infomation Send Inquiry Company name:Suzhou since gas system co.,ltd Status:[Offline] [Send message] [Chat] Business contact:Dylan Lee (Ms.) Telphone: Mobile: Fax: Area: Caribbean Region-Bermuda Address:No78,Tongxin Road,High technology districit Zip:215000