STAINLESS STEEL BUSHING SUPPORT MATERIAL

Support material Stainless steel ( SUS-316 / SUS-304 ) 

Intermediate layer Sintered bronze

Sliding layer PTFE+Oil Fiber

WRAPPED STAINLESS STEEL BUSHING SUPPORT MATERIAL STRUCTURE

structure 

1.PTFE、 polymer fibres mixture 0.01~0.03mm, lead-free provides an excellent initial transfer film, 

which effectively coats the mating surface of the bearing assembly, forming an oxide type solid lubricant film.

2.Sintered bronze powder 0.20-0.35mm, provides max. thermal conductivity away from the bearing surface,

also serves as a reservoir for the PTFE mixture.

3.Stainless steel backing, provides high load carrying capacity, very high level of resistance in corrosive environments.

  MATERIAL PROPERTIES

Specific load capacity static ≤ 250 [ N/mm2 ]

Specific load capacity dynamic ≤ 140 [ N/mm2 ] at low sliding speeds

Sliding speed ≤ 2,0 [ m/s ]

Friction value 0,02 to 0,20 [ μ ]

Temperature strain -200 to +280 [ °C ]

Max. Pv - value 1,8 [ N/mm2 x m/s ] for a short time 3,6

  TOLERANCE DETAILS

Housing – ? H7

Bushing after mounting in the range of H

Shaft tolerance f7 to f8

  SHAFT MATERIAL