1, Slurry Pump Technical Parameter: 

a) Caliber: DN25-DN400mm
b) Flow:12-5040m3/hr
c) Head:5-118 m
d) Rotate speed:300-3800r/min
e) Motor power:15-1200 KW
f)  Working temperature:≤80 °C

2,  Slurry Pump Production Overview:   

                                                                                                                            
1. Horizontal, cantilevered, centrifugal, single stage slurry pump

2.Long bearing life: The bearing assembly is with large diameter shaft and short overhang.

3. Wear resistant and anti-abrasion wet parts: A05, A07, A33, A49 and rubber etc. They are completely interchangeable with each other

 4. Easily replaceable liners: Liners are bolted to the casing.

5. Easy adjustment of impeller: An impeller adjustment mechanism is provided below the bearing housing.

6 Discharge direction can be positioned at intervals of 45 degrees.

7. Simple maintenance throat-bush: the mating face of the throat bush is tapered, so the wear is reduced and removal is simple.

8. Sealing type: pcking seal,impeller sealing and mechanical seal.

9. Widely application: They are designed for handling abrasive, high density slurries in the metallurgical, mining, coal, power, building material and other industrial departments.

10.Certificate: ISO, CE.

3, Slurry Pump Main Features:   

a) Quick-wear parts has a long life

b) High efficiency and low power consumption
c) Easy to maintenance 
  
4, slurry Pump Application:                                                                                              

ZH,ZHH pumps are used to pump high-hardness, strong-corrosion and high-concentration

liquids that contain suspended solid particles, such as finished ores, refuse ores, ashes,

cinders, cements, mud, mineral stones and etc. in the industries of metallurgy, mining, coal,

power, building material and etc.