ID 9mm Pneumatic Solenoid Coil , 110V 220V AC Solenoid Coil EVI 7 / 9 4V210

Part No.: BB09029615
Specification: 4V210/Φ9x29.5 
ID: 9mm
Hole height: 29.5mm
Applied of voltage: AC110V or customize 
Resistant breakdown voltage: ≥1800V 1MA/min 
Indicator: with or without, we can do it according to your requirements 
Output type: DIN43650B connector 
Connector color: transparent, tawney, black
Protection function: VDR over-voltage protection(AC220V have) 
Voltage range: ±10%
Temperature resistant range: -20 -- +50 
Insulation class: F H 
Protection grade: IP65 
ED: 100% 
Certificates: ISO9001:2008, CE, SGS 
Coated materials: thermoplastic composite material etc.
Advantages: high temperature resistant, excellent moistureproof property 
Applications: widely used in 4V210, 4V310, 4V410 series pneumatic solenoid valve etc.

Detailed parameter and specifications of 4V210 series EVI 7/9 pneumatic solenoid coil:

EVI 7/9 4V210 pneumatic solenoid coil overall dimensions:

Advantages of our pneumatic solenoid valve coil:

1, Our coil is available in different sizes and with different electrical terminations, we have professional technicians to develop as your drawing or sample or your special demands.

2, We use heat resistant bobbin moulded with 30% glass filled thermoplastic polyester material

3, The enameled copper wire has features of class H 200 according to IEC 317-8

4, The yoke for leading magnetic field we chosen as low carbon iron

5, Encapsulation with high quality specially designed glass filled nylon

6, The use of other materials is possible upon special agreements. All coils are rated to class F and to IP65.

7, The coil is designed and constructed in accordance to EN 60204.1 and VDE 0580 and it is suitable for industrial ambient conditions.

8, For use in special ambients with high humidity, please do not hesitate to contact with us.

How we control solenoid coil quality during production:

1, Inspect raw material of enameled copper wire and thermoplastic or thermosetting plastic by mesure and testing

2, Set up parameters on coil winding machines, then manual inspect one by one after winding

3, After welded electrial terminations then tested by testing machines one by one to ensure all coils is workable

4, After moulded with thermoplastic or thermosetting plastic will be tested 100% again, and also will select 10% by random and assembled with solenoid valve then let it work for testing life.

5, After selected out some failed pneumatic solenoid coil, we will put them with stickers and marked failed reason on paper then destroy to avoid mixed into bulk order goods.

How we produce pneumatic solenoid coil:

We also produce Pneumatic Solenoid Valve Armature Assembly to match EVI 7/9 4V210 pneumatic solenoid coils, for example as bellow:

More our pneumatic solenoid coil and solenoid armature assembly for your reference:

Contact Infomation