Single stage hammer crusher parts

Introduction to the crusher：Single stage hammer crusher parts is used for crushing of brittle ore, such as limestone, mud silty sandstone, shale and gypsum and coal, also suitable for crushing the mixture of limestone and clay, with full rotary hammer quality, which can adjust the crushing plate and consequent grate, security doors and other structural features. It is fit for the requirements of the process of large size, crushing and grinding of the feed.

At present, 5000t / d even l0000t/d cement clinker production line grew in popularity, cement production equipment, large-scale demand also increases, the limestone crushing capacity l 000 t / h above, to adapt to the vertical mill process system requirements of single segment hammer type crusher parts has a very broad market demand.

The main technical performance parameters of single segment hammer crusher parts are as follows. Inlet size: X 2560mm 1805mm; maximum feed size: < L 000mm L * 250mm x 1500mm (which shall not be more than l0% is more than or equal to 1 m3 large); production capacity: l 000t/h; the particle size: less than or equal to 100 mm (95% above); motor power: 1000 kW; motor voltage: 10000 V; the external dimension of machine (not including attachments): 4900mm x 4100mm * 4200mm.

Domestic cement plants in the selection of the 1000t/h class above the crusher parts, most of the double rotor hammer crusher parts. Domestic same type single rotor crusher parts, at present, only a single segment of the single segment hammer crusher parts single output can be stable to achieve this level of magnitude.

Single segment hammer type crushing machine with double rotor crusher parts, less a motor and a transmission system, a rotor, namely main advantage is broken machine of its own stand-alone cost is very low and the majority of users, the machine of single rotor breaking more familiar.

By closely tracking the single segment hammer type crushing machine usage and timely correction of the deficiency of each link, after the shape of the single segment hammer type crusher has become the domestic and the highest yield of single rotor hammer crusher parts, has a broad market prospect.

Working principle of ore have different intrinsic defects, such as bedding, inclusions, cracks, especially ore in all directions expanded ranging from very small, and to visible cracks etc. resulting in the ore in all directions with different strength, impact the use of violent can make ore along the weakest vulnerable and fragile fracture and broken. But with the breaking process, the grain size of the ore is reduced, the fragile point and the weak surface are also decreased, and the strength of the ore correspondingly increases. The ore is getting stronger and stronger, and the volume of the unit needs a higher impact energy to break.

Single stage hammer crusher parts

Hammer crusher and impact crusher parts crusher are impact crusher, severe impact with high-speed rotary hammer or plate hammer and ore ore broken at the same time, movement speed, and counterattack plate or lining of the collision, the collisions between ore or other, multiple collisions are qualified products are discharged out of the machine outside.