Brand:-
Model:-
MOQ:-0 -
Principle of Operation:
1.Color touching screen Computerizd control and unlimited order store, rapid order changing,convenient operation and with humanity.
2.Adopting computerized control and electronic adjustments, adapting to utilizing habits of various clients and with convenient choice
3.Adopting strap foreside paper feed system, with stable high-speed operation and high accuracy
4.Having printing and slotting memory, auto zero adjustment and auto reset
5.Utilizing accurate ball bearing transmission in slotting and scoring interval , with stable operation and high precision.
6.Good quality alloy steel and rubbing process practiced in the main transmission gears prolong the utilizing span
7.Main electronic equipments are imported from abroad, with European quality standard
Features:
Model | 920(Four color) |
Maximum speed | 250 sheets / min |
Maximum sheet size(LW) | 900 x 2000 mm |
Maximum sheet size (with skip feeding) (LW) | 1200 x 2000mm |
Minimum sheet size9(LW) | 250 x 600 mm |
Maximum printing area(LW) | 900 x 1900 mm |
Paper thickness | 1.5-1.1mm |
Maximum square area(LW) | 490x 490 mm |
Minimum square area(LW) | Positive Knife130 x 130 mm Inverse Knife 220 60mm |
Flexo plate thickness | 7 mm |
Total power | 81.9 KW |
Machine dimensions(L x W x H) | 162600 x 4343 x 3416 mm |
Net weight | 52800 Kgs |
Optional features:
|
Specifications
1Auto Feeder + Leading Edge Feeder
1) Auto feeder
Motorized front stop board gap synchronized adjustment and left and right movement
Motorized operation and transmission side stop board movement.
Two groups of front guide pull roll. One is upper roller made from abrasion resistance rubber. The layer inside hardness 20 0A and outside 28 0A. Shaft head and rubber roll can be dismantled separately and it is not necessary to dismantle gear box to change rubber roller. The lower roller is hard chromed.
Motorized machine unit open and close has torque limit device.
Air volume of vacuum air sucking auxiliary feeding system can micro adjust
2) American SUN leading edge feeder (Four shafts)
Quick setting, and reduce maintenance. Safe and easy operation.
Reduce paperboard feeding crash.
Reduce paperboard waste and improve production efficiency.
Feed Flute E, curved and low quality board smoothly.
Over small vacuum sucking pressure for inverter adjustment is suitable for different paperboard. Air compressor: 7.5KW.
Skip Feeding.
Front edge of paperboard as benchmark reduces length error greatly.
Paperboard is fed to the pull roll with the same speed, which will not affect the passing precision because of speed difference.
Back support frame adjust different position by electric control
2Vaccum Dust Remover For Feeding
1) Double rows of brush.
2) Removing dust and powder by high pressure air blower.
3 Printing unit (with vacuum bottom sucking)
1) Printing Roller.
Outer Diameter of printing roller : 317.52 mm (including plate thickness).
Printing Roller (with printing plate) phase can be motorized operated or adjusted at degree 360 clockwise or anti-clockwise. It can be operated under running or stop conditions.
Printing Roll is precisely grinded with hard chromed treatment and dynamic balance test.
Printing roller can be micro adjusted for cross movement within left and right distance limit: 12.5mm. The effective limit: 25mm.
Auto zero adjust for printing unit.
Motor-operated electric foot pedal to assist man
