34EO H6B , 34EO H10B , 34EO H6L , 34EO H10L , operated directional vales hydraulic solenoid

34E type directional control valves are solenoid controlled reversing slide valve for controlling the fluid opening. Stop and direction. This directional control valve includes a valve body. One or two solenoids, control valve, and a return spring or two. In the non-energized state. Control valve return spring is held in the neutral or initial position. Wet control valve operated by an electromagnet.

Solenoid valve variety, according to their number and the number of job positions the number of paths can be divided into two-way, two-way, three-way, etc.; its reduction and positioning can be divided into spring return, steel ball positioning, without reset spring; its connection type solenoid valve can be divided into flanged and threaded connection; in the form of its structure with the electromagnet can be divided into dry and wet, for each category another AC, DC, and other forms of the whole, and the required power supply voltage and a nice variety, so there are many differences in their structure.

1. Press the number of interfaces and the number of switching positions Category

Interface refers to a variety of connected tubing valve inlet and outlet, the inlet is usually labeled P, back to the oil port is labeled as R or T, the oil port places A, B to represent. Movable within the valve spool position number is called the number of switching positions, we usually called the interface "on", the spool position is called "bit." Thus, according to their number and the number of job positions the number of paths can be divided into two-way, two-way, three-way, etc.
Bit and symbol path
2. Classification by mode of operation within the driving force behind moving the valve spool have hands, feet, mechanical, hydraulic, and electromagnetic methods.
3. Reset and their positioning in the form of classification

It can be divided into spring return, steel ball positioning, no reset spring.

4. The form of their connection with the solenoid valve classification

It can be divided into flanged and threaded connections.

5. The form of the structure of its category with an electromagnet

It can be divided into dry and wet.

1. Nominal size 6 (cetop 3)

2. Completely interchangeable with Vickers and Yuken

3. Very competitive price

4. 1 year of warranty

5. Widely used for various hydraulic systems

6. Max. operating pressure up to 350 bar(5076psi)

7. Max. flow 80L/min( 21 US gpm)=60 L/min (15.8 US gpm)-AC

8. Direct operated directional spool valve with solenoid actuation in high perfomance version

9. Porting pattern to DIN 24340 form A (without locating bore)

10. Porting pattern to ISO 4401-03-02-0-05 and NFPA T3.5.1 R2 D03 (with locating bore)

11. Wet-pin DC or AC voltage solenoids with demountable coil

12. Solenoid coil can be rotated 900

13. The coil can be changed without open the the pressure-tight chamber

14. Electrical connection as individual or central connection

15. Manual override, optional.

Shipment and Payment
1: Usually we ship your order by sea or by air...
2: We do our best to ship your order within 1 week after receiving your payment
3: We'll tell you the tracking number once your order has been sent.
4: We accept T/T Bank transfer, L/C, Western Union, Moneygram, Paypal.