Electric Opening AAC Autoclave  AAC Block Making Machine  Full Automatic Autoclave

1. Full Automatic Autoclave Product Description:

The main product is autoclave aerated concrete block, it is the core equipment of production line. once the failure will cause the embryo out of kettle and equipment can’t operate substandard conditions, so the safe operation is extremely important. Autoclave is the hydration reaction of silicate products, the main equipment to obtain the physical and mechanical properties. The operation used in aerated concrete block production is the main content of relationship between production safety and energy utilization.

2. Autoclave structure

The main parts of autoclave are autoclave door ,body apparatus, tank cover device, the door swing device, hand reducer, safety interlocks, bearings, insulation,,sealing devices, plumbing valves and meters, etc., also attached with drainage and electric control devices. Various structural designs and manufacturing can be safe and reliable, also can ensure the autoclave more stable in performance.

3. The safe operation of steam autoclave details:

Autoclave operation is simple, but very important, the operation process is generally good, both inside and outside the rail bridge connecting kettle, the car pulled into the kettle, kettle and check the ends of parking position properly, the withdrawal of the bridge, close the kettle door (in the pot ring coated with graphite lubricant, inflate the seal, should be closed before then the vacuum, by heating, cooling, air curing temperature, finally open the door to a kettle. Autoclave in operation should pay attention to the following points:

3. 1. The safety valve

The safety valve is in the autoclave pressure exceeds the limit, the automatic unloading components, therefore, as the pressure vessel autoclave should be equipped with more than two safety valves, so that when a failure of the other one still use. Safety valve opening pressure should be rated according to the allowable working pressure autoclave to adjust, should be slightly lower than the allowable pressure value, in order to ensure the good performance of the safety valve must be regular maintenance and daily maintenance work.

3. 2. The kettle door switch

The products into the kettle, should carefully manage the cauldron gate, is in engagement with the kettle kettle door ring, and pull down the safety. In the air before checking kettle door closed. Complete the maintenance, before opening the kettle door must pay attention to whether there is pressure vessel inspection, and the first to open the safe, put the residual gas