Brand:-
Model:-
MOQ:-0 -
Send Inquiry
WSH02 WSH03 high pressure solenoid directional valves
General Data
| Mounting position | anywhere | |
| Operating temperature | -30~+50(nitrile rubber seal) | |
| -20~+50(rubber seal) | ||
| weight | Single solenoid valve kg | 1.45 |
| Double solenoid valve kg | 1.95 | |
Hydraulic Data
| Maximum operating voltage fluid port P,A,B Mpa | 31.5 |
| Hydraulic fluid port Mpa | 21(DC):16(AC) When working pressure exceeds the allowable pressure, valves with the sign bit A,B must use T as oil drain port |
| Maximum flow rate 1/min | 80(DC); 60(AC) | ||
| Flux areas (when in the median) | Type Q | mm2 | about 6% of the nominal cross-sectional area |
| Type W | mm2 | about 6% of the nominal cross-sectional area | |
| Hydraulic oil 1,suitable for nitrile rubber and fluoro rubber seal 2,Fluoro seal only | Mineral oil(HL,HLP) by DIN51 524 Rapid biological solution oil by VDMA24 568 HETG 1); HEPG 2);HEES 3) | ||
| The oil temperature range | -30~+80(nitrile rubber seal) | ||
| -20~+80(rubber seal) | |||
| Viscosity range mm2/s
| 2.8-500 | ||
| Oil cleanliness | The highest oil pollution level by NASI1639 Class 9 recommend minimum filter filtration precision β10 higher than 75 | ||
Electrical Data
| Voltage category | DC | AC(50HZ) |
| Supply voltage V | 12,24,48,110,220 | 110 220 |
| Allowable voltage tolerance % | +10~ -15 | +10~ —15 |
| Power consumption W | 30 | - |
| Holding current A | - | 0.17(220V) |
| Starting current A | - | 0.72(220V) |
| Working system ED% | 100 | 100 |
| Reversing time ms | 125~145 | 10~20 |
| Resetting time ms | 100~250 | 15~40 |
| Switching time times/h | lower than 15000
Contact Infomation
Send Inquiry
Company name:GOGO Automatic Company Ltd.
Status:[Offline] [Send message] [Chat] Business contact:Mrs. Jen Qi (Ms.) Telphone:  Mobile:  Fax:  Area: Caribbean Region-Bermuda  Address:No.28,Nandu Road,Jiangkou Town Zip:315000 |