Brand:-
Model:-
MOQ:-0 -
Quick Detail:
| Name | Other Name | Brand Name | |
| Flanging machine | Edging machine Spinning machine | Feature | Leading quality, unique design, good handling, cost-effective. Can be customized according to customer's requirements. |
| Capacity | Can make Φ6500×40mm dished end.
| Advantages | With this pressing machine,the spinned dished end have smooth surface,small round mark, good roundness, high productivity Other model can be customized according to customer's demands |
Extensive applications of dished end:
Dished end is a major part which on the end cap of pressure vessels,such us storage tanks, heat exchangers, towers, reaction kettles, boilers and separation equipment. So our machine is quite wildly uesd in these fields.
Specifications
| No | Name | Parameter |
| 1 | Max. plate thickness S | Q235 40mm |
| 2 | Min. plate thickness S | Stainless steel 3mm |
| 3 | Max. plate radius | R820mm |
| 4 | Min. plate radius | R30mm |
| 5 | Max diameter of ellipsoidal dish end | D=6500 |
| 6 | Min diameter of ellipsoidal dish end | D=1700 |
| 7 | Forming wheel axle diameter | D=280mm |
| 8 | Forming wheel rotation power | N=67KW/55KW double speed |
Additional requirements
1, The pressure of oblique cylinder, front cylinder, clamping must show on pressure gauge and could be adjustable. The speed of front and rear cylinders could be adjustable. Hydraulic station pressure could show on gauge and adjustable
2, A pressure wheel (mounted on the axle), and quenching treatment HRC46 ~ 50.
3, 17 forming wheels, R30,R50,R80,R100,R150,R200,R250,R300,R350,R400,R450,R500,R550,R600,R650,R700,R760,R820. Material QT600-3, marked with stamp. Forming wheel must have good abrasion resistance; dish end must have good gloss after spinning.
4, Make sure clamping cylinder work normally
5, Nut (for screw) strength: abrasion resistance must ZHA166-6-3-2 (aluminum brass), that is 9-4 copper.
6, Inner height 3383mm Total height 4883mm.
Dished end making process and other suggested machines:
1.CNC Gantry Flame and Plasma Cutting Machine
We use this machine to cut the plate. If small dish end, we can cut a whole circle directly, if big dish end, in order to save material, we usually cut two pieces, then weld them into whole circle.
2.Grinder
After welding, we use this small trolley to grind the welding joint and get flat material.
3. YGJ &Ph
