Translucent Plexiglass Cast Lucite Acrylic Sheet 10mm for advertising singage Board

• Thickness: 2mm to 500mm
• Size:1000*2000mm,1220*1830mm,1220*2440mm,1500*3000mm,2000*3000mm, 2000*4000mm, 2000*5000mm 2500*81000mm, etc a lot of size
• Color: clear & colored sheet are available
• Raw material: 100% Lucite & MITSUBISH MMA

• Description: Plexiglass - CAST Acrylic Sheet is optically transparent, unaffected by moisture, and offers a high strength-to-weight ratio, and high light transmittance. Plexiglass-Cast Acrylic sheets can be easily heat-formed without loss of optical clarity. Prolonged exposure to moisture, or even total immersion in water, does not significantly effect the mechanical or optical properties of this outstanding material. Plexiglass Sheets (Acrylic sheets) may vary slightly by brand, but process technique is the more important factor (Cast or Extruded).

Features of Cast Plexiglass Sheets - Cast Acrylic Sheets:

  Plexiglass Cast Acrylic Sheets are 17 times stronger than glass !!

 Economical transparent material that is easily machined & thermoformed

 Note: All sizes are expressed in INCHES.

 Sheets larger than 24" x 48" can be expensive to ship - Select the Smallest Plexiglass Sheet you can Use

 Translucent = Light & Shadows can be seen through Sheet.

 Transparent = Images can be viewed through sheet (like tinted glass)

 Opaque = Neither light nor images can be seen through the sheet.

Why use CAST Acrylic sheet verses EXTRUDED Acrylic sheet ?

 Continuous Service Temp: 180 F (Cast) vs. 160 F (Extruded)

 Formability Temp: 340 F to 380 F (Cast) vs 290 F to 320 F (Extruded)

 Cast acrylic sheet has a higher molecular weight, therefore it will cut, drill and rout cleaner. As you machine cast 

 acrylic, the shavings will flake off whereas the extruded acrylic shavings can gum up on the tool.

 Cast acrylic sheet also offers better glue-joint effectiveness and performs better in laser cutting.

Applicat