Brand:-
Model:-
MOQ:-0 -
Blue ABS Filament 1.75 / 3D Printer ABS Filament For Color 3D Printing
Quick Detail:
1.75mm Gray 3D printer ABS filament
*Color: Light blue
*Length: 420m
*Color: More than 20
*3D printer ABS filament
Description:
Introduction ABS filament
ABS, Acrylonitrile Butadiene Styrene, is a polymer that is molded and engineered to be a great material for 3D printing.
- Our 1.75mm Light blue 3D printer ABS filaments are manufactured from virgin grade raw material (raw white pellets);
- Each ABS filament batch (color, material, thickness) is tested prior to shipment, and our ABS filament test by our 3D printer;
- All of our ABS filaments with the same physical properties, except the color;
- Our 1.75mm Light blue 3D printer filaments are sealed packing without moisture before shipping - moisture will ruin this material;
- The color will also vary from the picture due to lighting condition;
- The melting point and diameter tolerance of our filaments are different due to the density of the material;
- The feed rate and the size of the hot end used will also affect melting point;
- A properly sized roller and calibrated hot end is required for good performance;
Our 1.75mm Light blue 3D printer ABS filament are applied to a variety of 3D printer, Makerbot, Mendel, Prusa, Huxley, BFB series, RepRap, Rapman, Solidoodle etc.
Temperature properties
For Desktop 3D printer successful printing, the correct temperature settings are very important. The material properties and advised print settings of ABS are shown in the table below.
| Glass transition temperature | +/- 78 °C |
| Melting temperature | 175 °C |
|
|
