ASTM A790 SAF 2507 Duplex Pipe Higher Yield With Annealing And Pickling

    MTSCOMAXTECH is specialized in duplex steel pipes produce . So we know good at duplex steel knowledge . Hope the clients who are choose us can be very assured . And no need worry about our produce ability. We , MTSCOMAXTECH , is worth for your belived .

    Most of 2507 duplex steel pipes are produced by cold drawn method . The alloy has higher yield

strength and lower ductility than austenitic steels so fabricators may fid that higher forming forces , increased radius of bending , and increased allowance for springback are necessary . Deep drawing , stretch forming , and similar processes are more difficult to perform on 2507 than on an austenitic

stainless steel . When forming requires more than 10% cold deformation , a solution anneal and quench

are recommended . And finished cold drawn duplex steel pipe , manufacturer should be solution annealed and quenched . The minimum annealing tempeture is 19250F . Annealing should be followed immediately by a rapid air or water quench. To obtain maximum corrosion resistance, heat treated products should be pickled and rinsed .

Item	Description
Basic Information	Material Grade	S32205, S31803, S32304, S32750, F51, F53, 2205, 2507 etc
	Outer Diameter	5.80mm-323.90mm (0.23" to 12")
	Wall Thickness	0.71mm-25.4mm (0.04" to 1")
	Length	Normally fixed length 6m, can as per customer’s requirement
	Standard	ASTM A789; ASTM A790; EN 10216-5ect.
	Process Method	Cold Drawn or Cold Rolled
Industry & Advantage	Application	a) Petroleum Contact Infomation Send Inquiry Company name:Jiaxing MT stainless steel co.,ltd. Status:[Offline] [Send message] [Chat] Business contact:Miss. Lisa Lu (Ms.) Telphone: Mobile: Fax: Area: Caribbean Region-Bermuda Address:28 # , Western Erhuan Road , Jiaxing City , Zhejiang Provinc Zip:314000