XUNDA Corrosion Protection Tape Pipe wrap Materials Systems Black Yellow White Customized
 
Description:
 
This coating system can be used for the purposes of steel pipe surface corrosion resistance for various pipelines in facility projects of petroleum, petrochemical industry, city gas, oil and gas storage and transportation, power, water supply, metallurgy, civil aviation, etc.
 
1.1 Inner wrapping adhesive tape:
(Anti corrosion tape, Anti corrosion tape, Anticorrosive tape) is for anti corrosion of underground, underwater, & overhead pipelines.
 
Features:
1) The specification of the tape consists of two layers, adhesive and film
2) Inner layer: butyl rubber
3) Outer layer: polyethylene
4) Thickness: 0.38 - 1.27mm
5) Width: 50mm, 75mm, 100mm, 150mm, 230mm, 300mm,500 mm,800mm,900mm
6) Length: 30 - 300m
1.2 Outer wrapping adhesive tape:
(Protection Tape, Protective Tape,Mechanical tape ) is for protection of pipe and the surface of Inner Tape from damages.
 
Features:
1) The specification of the tape consists of two layers, adhesive and film
2) Inner layer: butyl rubber
3) Outer layer: polyethylene
4) Thickness: 0.40 - 1.30mm
5) Width: 50mm, 75mm, 100mm, 150mm, 230mm, 300mm,500 mm,800mm,900mm
6) Length: 30 - 300m
1.3. Anti corrosion Tape Primer Coat
(Synthetic Primer) complementary product covers of the rusting steel pipe and enable to enhance the adhesive to the pipe since it is working with the adhesive of the polyethylene tape.
P19: Solid content 19%;
P27: Solid content 27%.

 
4.Application of XUNDA Corrosion Protection Tape Pipe wrap Materials Systems Black Yellow White Customized
 
1.Steel pipe pretreatment
1.1 Keeping the pipe external surface clean and dry. Remove the dust, 
oil, welding slag, burrs, grease and dirt on pipe surface.
1.2 Pipe surface prepared up-to a level of Sa 2 or 2 ½ or St 2/st by sand blasting. 
1.3 After the pre-cleaning operations,the pipe surface not smooth
which may sharp the pipe coating should be burnished , the abrasive 
dust attached on the pipe surface should also be cleaned clearly.
1.4 If flash rusting occurs, the surfaces must be re-cleaned by blasting as above. 
2.Coating &Wrapping application
2.1 Coating &wrapping application consist&