Brand:-
Model:-
MOQ:-0 -
Send Inquiry
Square bars Tungsten Carbide Plates for tools cutting wood or metal
Applications:
Carbide strip is widely used for general wood cutters / hard wood cutters, plastic and tobacco cutting.
And it is suitable for the production of various types of motors, electronic progressive dies punches.
Tungsten Carbide - Main Property:
- Excellent Hardness: 86~93 HRA, which equal to 68~81HRC;
- Excellent hot working performance: Hardness could be remained at 60 HRC under 900~1000
- Excellent wear resistance;
- High cutting speed;
- Long service life
Common grades for cemented carbide strips:
| Grade | Density g/cm³ | TRS | Hardness HRA | Performance & application | Approx ISO grade |
| YG6 | 14.9 | 2150 | 90 | Good wear resisitance, used for cutting hard wood, original wood, aluminum section bar, brass and cast iron. | K10 |
| YG6A | 14.9 | 1860 | 92 | Wear resistance even higher than YG6, used for cutting hard wood, original wood, aluminum section bar, brass and cast iron. | K10 |
| YG8 | 14.7 | 2320 | 89.5 | High wear resistance and percussion resistance. Used for processing hard wood, soft wood, ferrous and non-ferrous metal. | K20 |
| YS2T | 14.5 | 2350 | 92 | Fine grain sized carbide. High wear resistance, high bending strength, high thermal strength. Used for machining refractory alloys, stainless steel and high manganese steel etc. | |
| YS25 | 13.0 | 2200 | 91 | Suitable for processing cast iron, non-ferrous metal and non-metallid materials. | |
| YG10X | 14.5 | 2150 | 92.2 | Suitable for processing cast iron, non-ferrous metal and non-metallid materials | K20 |
Drawing and common sizes:
W×T×L | W (mm) | T (mm) | L (mm) | W×T×L | W (mm) | T (mm) | L (mm) |
| 38+0.2+0.4 | 13+0.15+0.35 | 330+0+3.0 | 1434+0.4+0.6 | 25+0.15+0.35 | 330+0+3.0 | ||
| 814+0.3+0.5 | 25+0.15+0.35 | 330+0+3.0 |
Note: Product can be customized. The data sheet is for your reference.
Description:
Tungsten carbide strip is available for different
