X ray inspection system (jh-10080)
Feature:
1. Alarm by sounds & light: Alarm by sounds and light when conform to condition.
2. Network interface: Could be connected with local area network and support multi-terminal check baggage at same time
3. Safety ray: Transmit ray under automatic control, avoids the miss.
4. Turn off by a key control: Turn off the machine only need one step: Revolves the key. The equipment automatic security close-down, does not need complex many steps, is simpler.
5. Eagle-eye: Could be expediently observing enlargement area.
6. Estimate malfunction by self: Automatic estimate malfunction and prompt message, helpful for the maintenance.
Technical data:
Tunnel size: 1000(w)× 800(h)mm
Conveyor speed: 0.22 m/s
Conveyor max load: 200 kg
Single inspection dosage: Wire resolution: 0.1mm metal line
Steel penetration: 30mm armor plate
Film safety: For ISO 1600
Maximum leakage radiation: X-ray generator:
Orientation: Vertically upward
Tube current: 0.4~1.2mA(adjustable)
Anode voltage: 100~160 kv(adjustable)
Angle: 80°
Generator cooling/working periods: Sealed oil bath with forced air/100%
Image performance system:
X-ray sensor: L type photo-diode array detector, 12bit
Monitor: High resolution 17inch color LCD display
Color quality: 24 bit real colors
Edge enhancement: Object contour edge is more distinct
Super image enhancement: Image detail is more distinct
High penetrate strength display: Increase brightness of dark area in image to display object which is behind high absorptivity mass distinctly
Low penetrate strength display: Increase contrast of low absorptivity mass (easy to penetrate) to display it distinctly
Magnifier: Function of partial enlargement
Brightening/dimming: Increase brightness of image/decrease brichtness of image
Image recurrence: Display previous twenty images and process any one of them
Image restoration: Restore image to initial status at the time of stopping conveyor
Image storing: Real time store any image and process it in operation status
Multi-energy function:
Multi-energy color: Display organic material for orange, display inorganic material for blue, and display mixture for green
High energy/low enercy: Switch to display two energy type, high energy stands for metal etc., low energy stands for nonmetallic
Auxiliay function for drugs & explosives: Help to detect such dangerous material as drugs & explosives etc.
Audible & visible alarm: Give sound and visible signal when conforming to condition
Operating environment:
Storage temperature: -20c to 60c
Operating temperature: 0c to 45c
Relative humidity: 20 to 95% non-condensing
System power: 220 vac (± 10%) 50± 3Hz
Power wastage: 1.5 kw (max)
Noise: