CE approved high speed security 110V voltage intelligent flap barrier gate with IR sensors

Keywords: wing barrier, swing barrier, flap barrier, security wing barrier, safety wing barrier, access wing barrier, access barrier, auto gate, arms gate, arms turnstile, rotate gate, rotate turnstile gate, arm fall turnstile gate, pedestian access gate, traffic gate, waist height turnstile, half height turnstile, full height turnstile, speed gate, entrace turnstile, entrance gate, turnstile, tripod turnstile, security turnstile, safety turnstile, turnstile gate, access control turnstile, access control gate, access gate 

Introduction of Flap Barrier Gate:

Sinomatic flap barrier gate integrating with mechanism, electron, microprocessor and various identification technology is compatible with card reader devices such as IC card, ID card, bar code, fingerprint and so on. By configuring all kinds of identification devices and adopting reliable safeguard devices, alarm devices, direction indicator etc, it is able to achieve access intelligetilized control and management.

Applications of Flap Barrier Gate:

1. The station, wharf, tourist attraction, entrance and exit management channel of factory

2. Recount channel management of exhibition, swimming pool, etc

3. Time attendance, access control, consumption management for enterprise or business buildings

4. Special channel management system

Features of Flap Barrier Gate:

1. Fault detection and alarm functions, easy to use and maintenance.

2. The running status can be programmed and controlled with the built-in keyboard on the main board.

3. Mechanical anti-pinch function. If the gate meets resistance in the reset process, motors will stop working automatically within the prescribed time and reset again after the default delay (till fully reset).

4. Anti-breakthrough function. The gate is locked automatically until opening signal received.

5. Synchronization functions (for dual gate equipment).

6. Automatic reset function. Should the user fail to pass within the prescribed time (default time is 5 seconds), the system will cancel the authority of the current user automatically.

7. Gate can be set as normally open or normally closed.

8. Can be used with variety of card readers: IC / ID card readers, bar codes, fingerprints, etc. (Access controller needed).

9. Direction can be set as single-direction or bi-direction.

10. LED direction indicator.

11. Gate auto opens when power off and auto close when power on, complying with fire safety requirements.

12. Alarm function, in case of illegal intrusion and reverse intrusion, etc.

13. Counter function (optional).

14. Support infrared photocell for anti-pinch and reset function.

Specifications of Flap Barrier Gate:

Item	Specification
Power supply	AC220±10%V 50Hz/AC110±10% 60Hz
Access device input voltage	Dry contact or 12V electrical level signal  or > 100ms 12V impulse signal, driving current > 10mA
Motor voltage	DC 24V (brush motor)
Max flow rate	25 to 30 person per minute
Flap opening / closing time	1s
Reset time when power on	3s
Working tempe Contact Infomation Send Inquiry Company name:SHENZHEN SINOMATIC TECHNOLOGY CO., LIMITED Status:[Offline] [Send message] [Chat] Business contact:Manfrid Lee (Ms.) Telphone: Mobile: Fax: Area: Caribbean Region-Bermuda Address:No.59 Xinhe Road, Shangmugu, Pinghu, Longgang, Shenzhen, Gua Zip:518000