Electronic Portable Hydraulic Basketball Stand , Green Adjustable Basketball Stand

Technical Specifications :

Standard arm of basketball backstop : 3.35m ;

Along the ring from the ground : 3.05m ;

Size of basketball backstop bottom (L*W*H) : 240×110×5cm ;

These are made from high quality steels , can meet the technical requirements of Chinese sporting goods testing center. This product is qualified by QB / T1206-1991.

Materials :

Bottom : adopt 60×60×3mm square tube.16# channel, 60×60 angle iron, 8mm steel plate, welding ( PS: with motor and hydraulic pump, Key System accessories adopt 25mm,40mm steel processing, dynamic wheel adopt Φ150×50 high wear-resistant polypropylene ) ;

Front column: adopt 80×80×3.5mm square tube welding ;

Back column: adopt 75×50×3.5mm flat tube welding ;

Arm: adopt 75×50×3.5mm thick flat tube welding, reinforcement 75×50×3.0mm flat tube welding ;

Basketball Backstop Backboard rod: adopt Φ38×2.75 curved steel ;

Basketball Backstop Rebound pull rod: adopt 75×50×3.5mm steel ;

Structure principle :

In Basketball Backstop Bottom can be equipped with hydraulic and electrical systems, easy to lift , also with dynamic wheels to move the specified location, in the front of Backstop Rebound can be with welded screw to adjust connection to Backstop Rebound , good to adjust the rebound vertical, horizontal size, and locked well with a lock nut, after adjustment of ball rack is completed, locked well the lock lever of up and down , ensure the safe use. This electronic-hydraulic basketball backstop can be with functions of lift freely,folding and height adjustment by technologies of hydraulic and elastic. When rebounds rising , working pressure of oil system about 100kg / cm 2 , and the time for rebounds to rise at the limited position (Insurance mast dead) is three minutes. The frontier rim of basket can load within 180kg . The weight of per basketball backstop is about 1100 kg. Basketball surface using electrostatic spray or high-strength automotive paint . The product is designed with single-phase power supply (220V, 50Hz).

Backboard and Rim :

Backboard : adopt 13mm thick double-layer laminated safety glass panels, with features of high transparency, good weather resistance, anti-aging, corrosion-resistant , no easy to blur and ect , Under the boards along , covered with polyurethane foam security tapes , thickness is more than 25mm , bottom plate thickness is more than 50mm , comply with regulatory requirements , also can protect athletes from dunks effectively.

Rim : adopt Φ20 round steel bent by special mold , bottom adopts t=5mm thick steel plate , which made off on a folding machine and welding together, Spring for special custom , and can ensure cushion pressure and quickly reset when dunk .

Pr