Table of Main Parameter:
Nominal Core Diameter | Length | No. of Bolt | Diameter of Bolt Hole Do | Diameter of Bolt Hole Center Circle Do | Axial Displacement IN | Lateral Displacement | Angle of Deflection | ||
IN | mm | IN | N | IN | IN | Stretch | Compression | IN | |
1 1/4 | 32 | 7 | 4 | 5/8 | 3 1/2 | 1 3/16 | 2 | 1 7/8 | 40° |
1 1/2 | 40 | 7 | 4 | 5/8 | 3 7/8 | 1 3/16 | 2 | 1 7/8 | 40° |
2 | 50 | 7 | 4 | 3/4 | 4 3/4 | 1 3/16 | 2 | 1 7/8 | 40° |
2 1/2 | 65 | 7 | 4 | 3/4 | 5 1/2 | 1 3/16 | 2 | 1 7/8 | 40° |
3 | 80 | 7 | 4 | 3/4 | 6 | 1 3/16 | 2 | 1 7/8 | 40° |
4 | 100 | 9 | 8 | 3/4 | 7 1/2 | 1 3/8 | 2 | 1 5/8 | 35° |
5 | 125 | 9 | 8 | 7/8 | 8 1/2 | 1 3/8 | 2 | 1 5/8 | 35° |
6 | 150 | 9 | 8 | 7/8 | 9 1/2 | 1 3/8 | 2 | 1 5/8 | 35° |
8 | 200 | 13 | 8 | 7/8 | 11 1/4 | 1 3/8 | 2 1/2 | 1 3/8 | 30° |
10 | 250 | 13 | 12 | 1 | 14 1/4 | 1 3/8 | 2 1/2 | 1 3/8 | 30° |
12 | 300 | 13 | 12 | 1 | 17 | 1 3/8 | 2 1/2 | 1 3/8 | 30° |
Note: For flanges of other standards or non-standard. It is necessary to be agreed upon separately. Please specify standard of furnish diagram and relative parameter. We will manufacture accordingly.
Rubber material may be selected according to customer requirement
