Name:Brass angle valve:

Material:brass

chrome plated

Size:1/2*1/2

Detail Technical Requirements:
1.before assembling, parts should be cleaned. No oil or grease. Remove all burrs and sharp edges.
2.before connecting,body cap male thread should be coated with sealing glue.
3.handle turn or close freely.
4.after assembling, test by water at the pressure no less than 0.8MPA.No leakage.

Remarks: we can send free samples to you if you have ordors with this kind of angle,but you should afford the charge of Express.We can give you a good discount on this if you need larger quantity.Welcome to visit our company.