Usage:
1 Used in adhesive foam, fabrics, plastic leather, EVA etc.
2 Also used to adhesive raw materials of making shoes, cap, glove, handbag, box, sofa, etc

Characteristics:
1. Economical and practical.
2. It has all kinds of chromium gumming wheels to reduce glue loss, the users can choose gumming wheels according to different patterns according to different gumming materials.
3. It also has a long time suitable without distort and other good characteristics such as even, comfortable handle, permeability.
4. Also could achieve a multi-uses function with one machine through adding different gluing groove.
5. Surface of heating roller is coated with Teflon in order to efficacious prevent the hot melt adhesive against sticking on the surface of roller and carbonization
6. It equipped with speed regulation system VVVF control, and automatic temperature control system; It also can measure the length, easy to control production output and product quality.
7. Spreading width can be momentarily designed according to the clients requirement to control the cementing amount, diameter of heating roller is optional
8. Adjust the speed of heating roller according to the working requirement, both colloid trough and heating roller can control temperature independently.
9. New design structure, reliable technology, easy operation, low breakdown rate, long service time
10. High-efficiency cooling device insure the application range of the basic materials.

Range of application
This laminating machine is siutable for producting as following:
1. Outdoor products making, such as making cap, glove, box, sofa, automobile seating cushion etc.
2. Shoe making materials, such as fabric with leather, fabric with fabric, fabric with PE film
3. Clothmaking materials, handbag, such as fabric with waterproof film, fabric with fabric, fabric with fur, etc

Caution for using YA-01A Vertical Single Cementing Groove Laminating Machine
(1)The machine surface should be without watermarks, oil, dust, debris, large drum, mesh belt, rolling wheels, idler pulley, plastic pots, plastic roller, pulp wheel, knife plate should wipe, wash clean.
(2)Strictly prohibited on-load open, barrier gate.
(3)Motor can never exceed the load (110%); Accelerate, deceleration turning "speed adjustment" knob should be careful, and gradually transferred to the required speed, or easily damaged motor.
(4) Forbid to operate "positive inversion switch" when machinery is in running, otherwise fragile to damage converter and motor.
(5) To adjust the wheel of stepless variable speed machine can fine-tune the tightness of gluing when machine running, keep material speed synchronous with the heating roller, but prohibit to rotate the hand wheel when machine stop, (that is to say can not change speed), Otherwise, easy to damage stepless gearbox.
(6) Handle scraper board carefully, otherwise easy to damage the gluing embossing roller.
(7) Keep waxing regularly on stepless gearbox, motor belts, often add oil in chains, bearings, cylinder stroke, and change oil regularly in worm gear reducer to ensure its lubrication, running well.
(8) Big electric box should open regularly t check the time relay and intermediate relay whether loose or not, inside dust, cotton and other dirty (miscellaneous) material to be removed regularly to prevent blockage of cooling channel converter inconvenience of the machine.
(9) nverters data has been set well before leaving the factory, non-professionals is strictly prohibited to change, set, disassembly and repair.