Brand:Brand CH
Tungsten carbide bearing accessaries from our factory are made from virgin material.
--good wear resistance;
--reasonable price;
--trial order appreciated;
--prompt delivery.
And I'd be more than happy if our factory could help in any ways.
grade | rigidity | density | flexural strength | Performance and recommended usage | International standard |
CH01 | ≥93 | 14.8-15.1 | ≥1400 | fine-grained alloy, wear resistance. suitable for high-hard cast iron, boron-cylinder cast iron, hardened steel turning, boring cylinders, also applies to plastic, cardboard, ceramic processing | K01 |
CH05 | ≥92.5 | 14.7-15 | ≥1750 | K05 | |
CH5 | ≥91.8 | 13.9-14.1 | ≥1800 | fine-grained alloy, wear resistance. suitable for titanium machining, turning and milling all kinds of high-hard cast iron and steel finishing, can be used for all kinds of CNC cutting blade | K05/M05 |
CH10 | ≥91.5 | 14.65-14.89 | ≥2000 | fine-grained alloy, wear resistance. suitable for carpentry serrated, also suitable for hard cast iron, ductile iron, nonferrous metal and alloy car milling | K10/M10 |
CH10A | ≥92 | 14.7-14.9 | ≥2100 | ||
CH15 | ≥91.5 | 14.5-14.7 | ≥2000 | fine-grained alloy, wear resistance. bamboo and wood materials suitable for processing, low-hard cast iron, ductile iron .it can work under adverse conditions | K30/M30 |
YG8S | ≥90.5 | 14.5-14.8 | ≥2300 | suitable for bamboo and wood materials processing, but also suitable for low-hard gray cast iron, ductile iron, nonferrous metal and alloy processing | K30/M30 |
CH20 | ≥92 | 14.4-14.7 | ≥2000 | fine-grained alloy, suitable for numerical control blades and a variety of non-ferrous metal and alloy processing | K30 |
CH25 | ≥90.5 | 14.35-14.65 | ≥2100 | the grain alloy, good strength. suitable for low hardness gray cast iron, low-strength steel and wood processing, it can work under adverse conditions | K30 |
CH40 | ≥88.8 | 14.25-14.65 | ≥2700 | suitable for knives of stone, also to its suitability as feed machine hammer, ring gear alloy, steel sheet 0.8-1.2mm Cutter Knife | K40 |
YG6 | ≥90 | 14.7-15 | ≥2100 | suitable for cast iron, nonferrous metals and non-metallic materials processing | K20 |
YG6X | ≥91 | 14.75-15.1 | ≥2050 | utility in the case of small pressure suitable under the conditions of less than 6mm in diameter drawn wire, non-ferrous metal wires or rods | K10-K20 |
YG8 | ≥89.5 | 14.5-14.9 | ≥2200 | suitable for cast iron, nonferrous metals and alloys, non-metallic materials, stainless steel roughing and semi-finishing | K30 |
YG15 | ≥86.5 | 13.9-14.2 | ≥2300 | suitable for high compression steel bar and steel pipe stretching, working under stress in a larger perforation and punching the top of forging tools, such as nozzle guide plate | K40 |
YG20 | ≥85 | 13.4-13.8 | ≥2350 | suitable for stamping watch parts, musical instruments, leaf spring, the battery shell, toothpaste, skin, steel balls, screws, nuts and other mold | K50 |
YG20C | ≥82 | 13.4-13.8 | ≥2400 | suitable for production of standard parts, bearing tools, etc. used in the cold stone block, cold flushes, cold dies, bullets, cases, and stamping dies | K50 |
