Brand:S L Fluid
Send Inquiry
- The design and manufacture of "CRH" high pressure ball valves is carried out considering extreme operating requirements.
- The ball seats between two pre-compressed gaskets with floating system, ensuring a perfect tight both at low pressure and under vacuum.
- With the increase of internal pressure a greater contact is obtained between bass and gaskets, permitting a perfect tight even at the highest pressure.
Technical features
- Full-way valve.
- Floating ball-gas light on pre-compressed seats
- Operating pressure from 320 to 500 bar (according to Ø)
- Operating temperature from - 20°C to 100°C
- Open at 1 /4 turn
Standard execution
- Body and connection : black phosphating steel (38SMnPb10)
- Ball : Thick-chromed steel
- Ball seats : polyacetalic resin (DELRIN)
- Pin seals : NBR
- Throttle lever : printed and zinc-plated forged.
On request
- Body and connection: yellow zinc-plated steel
Ordering Code
| CRH | R | 2 | 1 | 1 | 1 | 1 |
| Connection Type | Body material | Boll material | ball seals material and smoothing lining material | Pivot and connections seals | ||
| CRH = High Pressure Ball Valve | R = gas/BSP | 2-2 vie/ways | 1- Steel | 1- Steel | 1- DERLIN (pom) | 1- NBR |
| N= NPT | 3=3 vie/ways | 2- States steel | 2- States steel | 2- PTFE (Teflon) | 3- VITON | |
| EL = DIN 2353 Light duty | ||||||
| ES= DIN 2353 Heavy duty |
