Qualified to MIL-J-5513C plus 5,000,000* endurance test cycles.
Aeroquip's 1817 Series ball bearing plane swivel Design Data
joints are qualified to MIL-J-5513 Revision C for
dependable 3,000 psi service. Aeroquip engineers Service: Swivel joints shown are for MIL-H-5606
have designed these swivel joints to provide ex- and MIL-H-83282 hydraulic fluid. Swivels are availceptionally
long trouble-free service. Design fea- able for Skydrol applications and any fluid or gas
tures include: compatible with available seals.
0 Ball bearings which minimize torque and maximize
service life Material: Corrosion resistant steel.
0 Stainless steel material minimizes envelope size Pressures: Operating 3,000 psi
and maximizes strength Proof 6,000 psi
o Dust seal excludes grit contamination which pro- Minimum Burst 12,000 psi
tects the ball bearings and seals for increased Temperature Range: -65'F. to +2750F. (-540C. to
service life + 1320C)
o Less than 5 psi pressure loss through straight Qualification: MIL-J-5513C Type II Class 3000,
configuration at rated flow Style a.
Aeroquip ball bearing plane swivel joints may be
used with hose assemblies to prevent binding or
twisting of the hose and to provide a flexible joint * The -4 size was subjected to 5,000,000 endurance test
in rigid lines. These low profile swivels are avail- cycles beyond MIL-J-5513C qualification requirement for
able in -4*, -6, -8, -10, -12 and -16 sizes with flared, a~spae cial helicopter rotor head application. Test report is
flareless or Dynatubet fitting ends.
t Dynatube is a Resistoflex registered trademark