Brand:QIANGJIE
Application:PE-RT
PE-RT is a new material which is Polyethylene of raised temperature resistance (polymerization of ethylene and octane).
The new pip and pip fitting are made of PE-RT called RPAP5.
Both inner and outer layers of plastic(PE-RT), embedded metal layer composite pipe butt welding of aluminum. Pip(RPAP5) can be hot melt connection with the pip fitting use hot melt machine only need 30 Seconds.
.
RPAP5 Pip
1, Non-toxic, corrosion resistance,light weight, good mechanical strength and more heat-resisting performance, long service life.
2, Fluid resistance inside pipe is small, not easy scaling, fluid not being polluted, and effective large diameter.
3, 100% insulating oxygen,stop oxygen's penetration. Aluminum-plastic pipes can be used as floor heating, shielding of communications lines, and prevent various audio, magnetic interference; Because of their good antistatic performance, they are also suitable for conveying gas and fuel. Pipes can be bent freely and made straight back
Nominal outside diameter | Thickness of pip wall | Thickness of internal plastic wall | Minimal thickness of external plastic wall | Thickness of Aluminum wall |
20 | 2.5 | 1.5 | 0.3 | 0.36 |
25 | 3.0 | 1.7 | 0.3 | 0.44 |
32 | 3.0 | 1.6 | 0.3 | 0.60 |
Cold water pip | Hot water pip | ||
Outside diameter | Inside diameter | Outside diameter | Inside diameter |
16 | 12 | 16 | 12 |
20 | 16 | 20 | 16 |
25 | 20 | 25 | 20 |
32 | 26 | 32 | 26 |
40 | 32 | 40 | 32 |
50 | 40 | 50 | 40 |
PE-RT fittings
Application:
1.Floor heating system pip
2.Hot and cold potable water systems
2.Drink water system
3.Solar facilities systems
6.Rain water and swimming pool pipe network system
Advantage:
(1)high quality
(2)work pressure :1.25MP
(3)Burst pressure:dn207Mpa, dn256Mpa, dn325Mpa
(4) Standard: ISO9001-2000
(5)pe-rt fitting(female tee )
(6)Pe-rt fitting( male tee)
.
Standards:
Chinese national standard: GB/T 13663
International standard: ISO 4427
