The Main Features of The LEADER solenoid valves

1. Valve Structure:
The LEADER branded solenoid valve is constructed of Direct Acting ,Spring Return, Normally Closed diaphragm type driven by the plunger activated by the magnetism induced from the coils above the body.

2. Valve Body:
The body is made of Forged Brass for durability and free of any pin hole or porosity of the defects which may usually occurred in the body made by casting.

3. Stem / Shaft: 
Made of the corrosive resistant material stainless steel for better corrosive resistance and higher degree of precision for fitting with the other mating parts for longer operation.

4. Diaphragm: 
The virgin rubber material of NBR or EPDM / Viton upon request for the diaphragm make it most reliable for long and durable operation.

5. Coils:
The coils, which are dust proof or water proof as option, are of IP65 protection and the solenoid valves are set for test in full compliance with Electromagnetic EMC performance of CE standards.

6. Connection:
The inlet and outlet are of threaded ends conforming to NPT,BSPT or BSPP which are precisely machined and well gauged for mating with ANSI / BSP threaded pipes or fittings as required by the customers.

• LEADER solenoid valves are ideal for automatic control of media for a wide range of uses which require zero or very low differental pressures
• In vaccum application, LEADER valves can be used for pressure range from 0.001 to 1000 torr. They may be used with gases with pressure over 2000mm of water column.
• The LEADER valve can be mounted in any position without jeopardising their operation it is however advisable to install them with the coil in a vertical position above the body.
• The LEADER valve can be applied in the following fields:

    - Thermohydraulic systems

  - Hydrocleaners

  - Food industry equipment

  - Instrument

  - metal smelting plant

  - Polyurethane system

  - Closed circuits

  - Environmentally-friendly system

  - Suction pad manipulators