Drawn Cup Needle Roller Bearing HK2210

Needle roller bearing ,drawn cup,open ends ,unsealed

The descriptions:

1. The drawn cup needle roller bearings are needle roller bearings with the deep drawn, thin-walled outer ring with either an open end or closed end.

2. The bearings are characterized by a very low sectional height and high load carrying capacity

3. The bearings are typically used in applications where the housing bore can not be used as a raceway for a needle roller and cage assembly but where a very compact and ecnomical bearing arrangement is required.

4. Typically, drawn cup needle roller bearings have a single row of rollers. However, wide sizes incorporate two needle roller and cage assemblies immediately asjacent to each other with a lubrication hole in the outer ring.

The dimensions:

We can offer  the following types:

 needle roller and cage assemblies 
 drawn cup needle roller bearings
   with open ends and with closed end 
   full complement, with open ends
 needle roller bearings with machined rings
   with and without flanges
   with and without an inner ring 
   with seals, with and without an inner ring
 alignment needle roller bearings

   with and without an inner ring
 inner rings for needle roller bearings 
 universal joint bearings 
 combined needle roller bearings (separate section)
   needle roller/angular contact ball bearings 
   needle roller/thrust ball bearings 
   needle roller/cylindrical roller thrust bearings 
 needle roller thrust bearings (separate section)
   needle roller and cage thrust assemblies
   needle roller thrust bearings with a centring spigot

The contact of my company: