Dual flow solenoid valve for fuel dispenser

is used for the fuel dispenser to control speedily and efficiently the high/low oil flow

Medium: fuel oils, gas,water and etc

Overshoot ( closing time): set lead 0.5Lpressure when nozzle open:0.115MPa<0.3L

Leakage: 0

Flow rate: >42L/min( high flow rate)

Power supply: 220VAC  50Hz   12VDC  50Hz  24VDC  50Hz

( Perssure when nozzle close 0.175Mpa)

( Pressure when nozzle open): 3.5-4L/min( small flow rate )

Voltage deviation: ±30%   Coils grade: H   Insulation strength 20MΩ

Working form 100% lead length: 1.5m (standard)   Explosion-proof mark:Power: 2×5W

Pressure range: 0.35MPa (Max) 0.035Mpa(Min)

Ambient temperature: -40  ~55    Relative humidity:  95%(+25  )

Medium temperature: -40  ~50     Working air pressure:  86~106Kpa

  Workplace: Applies to Zone 1, Zone 2 including type IIÿgroup T1~T3 explosion gas mixture