ATLANTIS ditch feed lateral system feeds directly from a flat channel.
On a 4-wheel cart, it is assembled a motor-driven pump group that sucks in the flow
required. There are two versions: electrical or diesel. In the first case, you need a surface
electricity cable that provide the power requested for the functioning; and regarding the
diesel case you need a generating set to supply power to the pump and to the whole
system (power drives....)
ATLANTIS LATERAL STANDARD:
It is ideal to be installed in any-lenght rectangular areas. With this machine, we can reach the point of
covering an irrigating wideness up to 140 meters.
ATLANTIS REVOLVING LATERAL:
With this system, as it has the possibility of rotating, we could cover up to 200 meters wideness and the
needed lenght with only one machine.
ATLANTIS LATERAL WITH PERPENDICULAR TOWABLE:
This machine is designed for working in areas where, due to obstacles, it is nol possible to rotate, as for
example vineyards in espalier or other plantations. It changes its position perpendiculary, and can cover 2, 3
or more strips up to 140 meters each and the needed lenght.
ATLANTIS STANDARD:
ATLANTIS Hippodrome Systems have been designed to irrigate square, rectangular and trapezoid-shape plots,
making the turn possible by pivoting in one or several points, and they irrigate when necessary, without
needing anchoring the central cart.
The pivot structure is assembled on the 4-wheel cart. and a hose feeds with water to the up-going pipe
and the elbow, both made of galvanized-steel of 8 5/8 (219mm) diameter. It contains a 13-wires external
collector ring, with an access ladder.
ATLANTIS MULTIDIRECTIONAL:
ATLANTIS Hippodrome Multidirectional allows irrigation also over L and U-shape plots, as the cart wheels
can be rotated in order to permit the self-propelled movement in different directions.
FLEXIBLE DROpPIPE
ATLANTIS flexible drainpipe is specially designed to be installed in pivots and lateral systems, it is made of
flexible and reinforced Ø20 mm piping, and it can be rolled up in order to adjust the nozzle height in
accordance with the crop development.
At the end of the hos e it i s coupled a external PVC counterweight in order to secure the penpendicufarity
and reduce wind-caused displacements.
PRESSURE REGULATORS
They allow an even application on slope grounds or in very long machines, and they guarantee the arnount
of water requested by each nozzle.
OVERHANG END GUN
It can reach from 10 to 30 metres depending on the spray
model, the flow and it pressure available, so that you can
broaden the irrigated area with this system.