The TZ66-S Wall mounted 3-way switch is a component of the lighting control system.
This wall mounted switch is designed to work with other Z-WAVE enabled devices.
Z-WAVE nodes of other types can be added to the system and will also act as repeaters if they support this function of repeating the signal received to other modules in the system.
As part of a Z-WAVE network, the TZ66-S will also act as a wireless repeater to insure that commands intended for another device in the network are received. This is useful when the device would otherwise be out of the radio range of the wireless controller.

Advanced operation
All on/All off
The TZ66-S Supports the ALL ON/ALL OFF commands.
The TZ66-S can be set to respond to ALL ON and ALL OFF commands 4 different ways.

Refer to your controller for information on how to swt the TZ66-S to operate in the manner your desire. Some controller may be only able to set certain settings of ALL ON/ALL OFF response the 4 different ways the TZ66-S can be setup to respond to ALL ON and ALL OFF commands are:
1. TZ66-S Will not respond to ALL ON or the ALL OFF command.
2. TZ66-S Will respond to ALL OFF commands but will not respond to ALL ON command.
3. TZ66-S Will respond to ALL ON commands but will not respond to ALL OFF command
4. TZ66-S Will respond to ALL ON and ALL OFF command.

Technical Data
Work Frequency: 868.42MHz
Work range: Max. 30m
Voltage: 230V/50Hz
Current: 6A~max. 1380W
Code: Self learning
Pls contact with me for more detail information.
Waiting for your kindly inquiry!